What's the Best Hot Tub

Author Topic: Manufacture of Southwest spas burns to the ground  (Read 3089 times)

stuart

  • Ultimate Member
  • *****
  • Posts: 2928
  • Big hairy guys need hottubs too...
Manufacture of Southwest spas burns to the ground
« on: March 29, 2005, 07:11:03 pm »
Here is the Oceanside news report...

Arson Suspected In Oceanside Manufacturing Plant

Last Updated:
03-29-05 at 12:05PM

Officials say Tuesday morning's industrial fire at an Oceanside spa manufacturing plant was sparked by an arsonist.

The fire broke out in the 300 block of Via Del Norte. Ten engine companies responded to the fire at a spa manufacturing company. Crews put out the blaze quickly, but remained on the scene to watch for hot-spots.

Hazardous materials crews were called in to help because there are chemicals at the Oceanside plant, which are used to make the spas.

Fire officials are still investigating the cause of the fire.

« Last Edit: March 29, 2005, 07:30:07 pm by stuart »

Hot Tub Forum

Manufacture of Southwest spas burns to the ground
« on: March 29, 2005, 07:11:03 pm »

Brewman

  • Ultimate Member
  • *****
  • Posts: 4092
  • Lead me not into temptation- I can find it myself!
Re: Manufacture of Southwest spas burns to the gro
« Reply #1 on: March 29, 2005, 07:53:56 pm »
Anyone know if this company was in financial trouble?
Brewman
Brewman

Steve

  • Ultimate Member
  • *****
  • Posts: 3196
Re: Manufacture of Southwest spas burns to the gro
« Reply #2 on: March 29, 2005, 08:10:40 pm »
That's horrible to hear. :-/ There's one fire I wouldn't want to deal with. :P

Steve

stuart

  • Ultimate Member
  • *****
  • Posts: 2928
  • Big hairy guys need hottubs too...
Re: Manufacture of Southwest spas burns to the gro
« Reply #3 on: March 29, 2005, 08:23:17 pm »
Quote
Anyone know if this company was in financial trouble?
Brewman

Hey! Where was Chas last night? ;) :D ;D

Chas

  • Mentor Level Member
  • ******
  • Posts: 6481
  • Hot water is Cool.
    • Spas etc.
Re: Manufacture of Southwest spas burns to the gro
« Reply #4 on: March 29, 2005, 08:27:52 pm »
I can account for my whereabouts, and my whenabouts.

It's the whoabouts which have me worried.

Was this in CA?

???
Former HotSpring Dealer - Southern Cal.

poolboy34

  • Guest
Re: Manufacture of Southwest spas burns to the gro
« Reply #5 on: March 29, 2005, 08:33:31 pm »
i wonder if that was the phoenix plant?? ::) ;)

Greenraisin

  • Junior Member
  • *
  • Posts: 40
  • See you down life's highway!
Re: Manufacture of Southwest spas burns to the gro
« Reply #6 on: March 29, 2005, 08:39:12 pm »
That's in Oceanside, CA, right north of San Diego. Never heard of them, but that's where that address is. I bet that was one nasty fire and some might thick smoke...

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Re: Manufacture of Southwest spas burns to the gro
« Reply #7 on: March 30, 2005, 10:41:06 am »
Lets see if they rebuild.  I worked for a company back in the early 80s that our Florida division had a fire that was suspected Arson.  When they found out they were going to rebuild, they didn't push the investigation too far.

The site southwestspas.com is down, but it is registered to

Southwest Spas
     1110 S COUNTRY CLUB DR
     MESA, AZ 85210-4618
     US
     480-969-6224 fax: 480-962-8984



« Last Edit: March 30, 2005, 10:44:32 am by wmccall »
Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

Chas

  • Mentor Level Member
  • ******
  • Posts: 6481
  • Hot water is Cool.
    • Spas etc.
Re: Manufacture of Southwest spas burns to the gro
« Reply #8 on: March 30, 2005, 11:13:17 am »
Wow - look at how poorly organized the place is: stuff all over the floor. No wonder it went up in smoke...

;)
Former HotSpring Dealer - Southern Cal.

salesdvl

  • Senior Member
  • ****
  • Posts: 1154
Re: Manufacture of Southwest spas burns to the gro
« Reply #9 on: March 30, 2005, 11:42:34 pm »
Would it be inappropriate to say "nice hose, Bill" ?

I'm just askin'    :)
Measure once, cut twice.

Hot Tub Forum

Re: Manufacture of Southwest spas burns to the gro
« Reply #9 on: March 30, 2005, 11:42:34 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42