I have a Jacuzzi Platinum Series that was working. We moved it from neighbor's house to ours, cleaned it, rebuilt the enclosure, and filled it. It warmed to 86 degrees then developed a FLO error.
We removed and cleaned filters, but the error persisted. We drained and re-filled through the filter chamber (in case it was airlock) but the FLO error persists.
I wonder if leaves etc. may have gotten in to the system. We saw it running and heated to 103 when we bought it - so this is a new quirk. Any expert thoughts on what else I should do?
I know there should be a flow sensor, but I'm not sure where to find that to check it.
