Author Topic: pump speed when adding chemicals (Read 2763 times)

abarts · « **on:** February 14, 2011, 09:38:11 am »

Does it matter what speed the pumps are on when adding chems? Can I just run pump 1 on low speed for one cycle? The tub is a 2010 j-365, it has two pumps. Pump one is a two speed and pump two a one speed. It also cycles every 12 hours.

Hot Tub Forum · « **on:** February 14, 2011, 09:38:11 am »

BNMac · « **Reply #1 on:** February 14, 2011, 11:26:50 am »

I run the jets/pumps on high for one cycle. This ensures good mixing.

TwinCitiesHotSpring · « **Reply #2 on:** February 14, 2011, 12:03:44 pm »

when adjusting pH and TA I will dilute and add on low speed or even just let the circ pump (assuming your particular spa has one) run its course....aeration causes pH to rise so it makes no sense to run the jets while your attempting to lower pH for example

Hot Tub Forum · « **Reply #2 on:** February 14, 2011, 12:03:44 pm »

Hot Tub Forum

News: