Hi ! I have a Jacuzzi J-350 and one of the diverter valves was "Stuck". It is SO stuck that I have cracked the handle trying to turn it.
I dis-assembled the valve and it's a pretty simple set-up.
There is a plastic flow restricter which directs the flow from the "feed" to one set of jets or the other.
When I removed it, it was scored up from small debirs such as very fine sand stones etc. I cleaned it up and wiped out the valve. I then applied some teflon lubricant used for spas and swimming pools and re-assembled.
It turns much easier now. I now have to find a replacement handle ( or 2 ). I am considering if I should go ahead and replace those restrictors or not.
Any suggestions ?
Thanks, Tim