What's the Best Hot Tub

Author Topic: Full Foam versus Perimeter Insulation  (Read 16706 times)

DonL

  • Junior Member
  • *
  • Posts: 1
  • I love YaBB 1G - SP1!
Re: Full Foam versus Perimeter Insulation
« Reply #30 on: December 09, 2005, 01:00:44 pm »
A simple way of thinking about full foam,

Where is the equipment compartment and what is between it and the elements?

If the only thing between the pump and heater is just a wood door or has vents to let heat out
you actually have plumbing on an outside wall, when you think about it, you wouldn't insulate a house that way, so why would you want a hot tub sitting out in the winter, with water filled pumps and an uninsulated door.

Just a thought,  

Plumbing is not meant to be on an outside wall.
Better to keep all plumbing in an insulated cabinet
and have the heat in the cabinet radiate through the shell, and if the shell has no insulation on it, the shell
will transfer the heat into the tub and if the power goes out you have 4 - 5 hundred gallons of hot water which can radiate back into the cabinet.

hope this helps,
Don

Hot Tub Forum

Re: Full Foam versus Perimeter Insulation
« Reply #30 on: December 09, 2005, 01:00:44 pm »

drewstar

  • Mentor Level Member
  • ******
  • Posts: 5274
Re: Full Foam versus Perimeter Insulation
« Reply #31 on: December 09, 2005, 01:38:02 pm »
So Don, I should insulate the cabinet door on my tub?


What ype of hot tub do you have?  

What do you do for a living?

Welcome to the forum!



07 Caldera Geneva

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: Full Foam versus Perimeter Insulation
« Reply #32 on: December 09, 2005, 02:06:34 pm »
Quote
A simple way of thinking about full foam,

Where is the equipment compartment and what is between it and the elements?

If the only thing between the pump and heater is just a wood door or has vents to let heat out
you actually have plumbing on an outside wall, when you think about it, you wouldn't insulate a house that way, so why would you want a hot tub sitting out in the winter, with water filled pumps and an uninsulated door.

Just a thought,  

Plumbing is not meant to be on an outside wall.
Better to keep all plumbing in an insulated cabinet
and have the heat in the cabinet radiate through the shell, and if the shell has no insulation on it, the shell
will transfer the heat into the tub and if the power goes out you have 4 - 5 hundred gallons of hot water which can radiate back into the cabinet.

hope this helps,
Don


Most FF dealers in this area sell a winter kit for there equipment area which insulates the equipment area from the elements. Just another thought! And with very very little heat loss coming from the vessel itself it makes it a wash versus the other insulation method.
Retired

Soakin

  • Full Member
  • ***
  • Posts: 258
Re: Full Foam versus Perimeter Insulation
« Reply #33 on: December 09, 2005, 04:58:35 pm »
Quote
So Don, I should insulate the cabinet door on my tub?
That, plus remove the insulation from the shell of your tub, so that it can heat the equipment.  ;)

Hot Tub Forum

Re: Full Foam versus Perimeter Insulation
« Reply #33 on: December 09, 2005, 04:58:35 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42