I’m having a strange water issue. I used Oh-Yuk in my HT for the 1st time. Ran the jets for 30 minutes then drained it.
I didn’t really have as much of a Goop ring around the HT I was expecting. But maybe that’s a good thing? Anyhow,
I cleaned the inside really well with Leisure Time Citrabright All-Purpose cleaner, the good orange smelling stuff. Then
I sprayed the tub down good while the drain plug was still opened. Then I refilled the tub using my Clean Screen filter,
as I have well water. I also used 16oz of Leisure Time Metal Gon, just like last time I filled my tub. However this time,
I decide to try and add Leisure Time Renew to shock the water. Almost instantly after adding the renew, I started to see
Brown stuff floating in the water. I’m going to assume its maybe high iron or copper? But I already used the Metal Gon
and filled my tub with my Clean Screen. Now to me, the water is clear but has a greenish tint to it and if I run a 10 minute
clean cycle, I get a brownish ring around the tub. I just filled the tub on Sunday. I checked the PH last night and it was low,
so was the Alkalinity so I added some Spa Up. I’ll double-check the water again later today to see where I’m at now.
But is the brownish ring maybe too much iron or copper? If so, can I just add some more Metal Gon to try and clear this up,
or do I need to drain the tub again? This didn't happen last time I filled my tub.
BTW, I have a 201 Gallon, 2015 Hotsprings NXT Jetsetter.
Thanks,
Dave…