What's the Best Hot Tub

Author Topic: Dynasty D3000 with Balboa 53170-h m3 motherboard. Help  (Read 2032 times)

T.Myers

  • Junior Member
  • *
  • Posts: 1
Dynasty D3000 with Balboa 53170-h m3 motherboard. Help
« on: November 07, 2015, 05:59:58 pm »
Put in a new mother board and topside controls..  I need help on how to set up the motherboard?!?!  This is a nightmare please help its my first tub😞

Hot Tub Forum

Dynasty D3000 with Balboa 53170-h m3 motherboard. Help
« on: November 07, 2015, 05:59:58 pm »

av8r

  • Full Member
  • ***
  • Posts: 244
Re: Dynasty D3000 with Balboa 53170-h m3 motherboard. Help
« Reply #1 on: November 07, 2015, 07:37:26 pm »
Have you contacted Balboa tech support?

Drummerguy

  • Junior Member
  • *
  • Posts: 32
Re: Dynasty D3000 with Balboa 53170-h m3 motherboard. Help
« Reply #2 on: November 08, 2015, 09:09:03 pm »
Just going out on a limb -unhook power with quick disconnect from side of house and flip breaker down in electric box to off position, open spa pack - take a pic of the one thats in there now and then make double sure they sent you the right one to begin with. If it is ,proceed to next step and start unplugging the connectors and then reinstall new board.

If this is too much for ya then A) call a local Spa hot tub tech for a service call or B) call tech support and they will walk you through it if you are comfortable doing this-dont be intimidated by the wires-its ok--we all have been there once or twice ! :) 

Hot Tub Forum

Re: Dynasty D3000 with Balboa 53170-h m3 motherboard. Help
« Reply #2 on: November 08, 2015, 09:09:03 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42