Author Topic: J480 Question (Read 2045 times)

gazruss · « **on:** November 07, 2013, 10:09:07 am »

I was in the tub last night, and while checking that all the jets were open in the footwell i noticed that 1 of the 4 suction covers had no "suction" the other 3 were working fine, you could feel a real strong pull, but the one shown highlighted was doing nothing, is this normal?

New to this hot tub stuff, and was just wondering.... other than that we love the J-480.
http://bit.ly/1bdP31L

Hot Tub Forum · « **on:** November 07, 2013, 10:09:07 am »

Jacuzzi Jim · « **Reply #1 on:** November 07, 2013, 01:45:52 pm »

It is probably the by-pass from the circ pump. If the filter is severely clogged, or something is stopping flow it would by-pass to that suction.

gazruss · « **Reply #2 on:** November 11, 2013, 11:44:27 am »

Thanks for your reply, been away so didn't get back sooner. I think your spot on with your comment. I got an e-mail from my dealer while i was away with the same response...

Again thanks for your help

Blueblur · « **Reply #3 on:** November 16, 2013, 08:45:16 am »

I just checked my 2013 J480 and that spot didn't suck in water either. If the jets are all working and no errors on the J1000, just enjoy the tub.

Hot Tub Forum · « **Reply #3 on:** November 16, 2013, 08:45:16 am »

Hot Tub Forum

News: