What's the Best Hot Tub

Author Topic: How do I remove a filter stand pipe?  (Read 7435 times)

hottub63

  • Full Member
  • ***
  • Posts: 109
How do I remove a filter stand pipe?
« on: March 25, 2013, 09:04:57 pm »
I have a hot springs hot tub and I want to remove the filter stand pipes and clean them out. The precious owner of the hot tub left some old filters on here and the filters started to break down and some of the runner from the filter started to stick around those filter stand pipes so I want to take them out and clean.

I'm thinking they just unscrew. Anyone ever done this before?

Hot Tub Forum

How do I remove a filter stand pipe?
« on: March 25, 2013, 09:04:57 pm »

Flyonthewall

  • Full Member
  • ***
  • Posts: 167
Re: How do I remove a filter stand pipe?
« Reply #1 on: March 29, 2013, 05:02:32 pm »
unscrew them counter clockwise.  just note where the grey hollow one comes off, and replace it back there.  it feeds the circ pump/heater.

Chas

  • Mentor Level Member
  • ******
  • Posts: 6481
  • Hot water is Cool.
    • Spas etc.
Re: How do I remove a filter stand pipe?
« Reply #2 on: March 30, 2013, 01:19:28 pm »
Be sure to turn off the power first. They put a dab of silicone to help secure the stand pipes, and it can drop in and be swallowed by the circ pump. If the power is off, (or if the power is off AND the tub is empty) it is easy to grab any bits of silicone which may come loose in the process of removing the stand pipe.

HTH

 8)
Former HotSpring Dealer - Southern Cal.

Hot Tub Forum

Re: How do I remove a filter stand pipe?
« Reply #2 on: March 30, 2013, 01:19:28 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42