Author Topic: Tied down, ready to go. (Read 6104 times)

wmccall · « **on:** October 29, 2012, 07:50:27 am »

If things go as predicted we will just get the west edge of the storm, 50-60mph winds, a lot of rain and perhaps some snow. I got the generator gassed and ready to go. Same for the snow blower. Hot tub is balanced chemically and the cover is tied down.

Hot Tub Forum · « **on:** October 29, 2012, 07:50:27 am »

vangoghsear · « **Reply #1 on:** October 29, 2012, 08:27:02 am »

it was due to cross right over us, but so far it dropped South. My prep was just adding a bit of chlorine to my 3 ppm residual I had after my trip so I could put off changing the water, and locking all four straps in place. The metal arm of the lifter crosses right over the middle of my tub so I think the top is secure.

I have a bit of a concern of flooding. The hot tub sits in an area that was under 3 feet of water after Irene. That flooded because several dams upstream from the lake we live on burst and it all emptied into ours filling it until our dam broke. The dams were all supposed to have been fixed, but let me tell you we're a bit anxious here.

H2O · « **Reply #2 on:** October 29, 2012, 08:50:39 am »

Same here guys.Tied down and ready.
Good luck and stay safe

rin-spa-aic · « **Reply #3 on:** October 29, 2012, 12:17:38 pm »

Last year my father's tub took 2 puncture wounds to the cover from flying limbs, and there isn't even a tree overhanging it.

Covered my cover with a tarp and tied that down. Hoping none of my trees send a branch in that direction.

I doubt my cover lifter bar would survive any gust strong enough to actually raise the cover.

Bonibelle · « **Reply #4 on:** October 29, 2012, 12:34:21 pm »

my tub cover is also racheted down. I put eye bolts in my deck for Irene last year..Just hope branches don't puncture it ...

Tman122 · « **Reply #5 on:** October 29, 2012, 04:02:05 pm »

And you guys think a snow storm is bad. Living in Northern Minnesota is cake compared to a hurricane!

vangoghsear · « **Reply #6 on:** October 29, 2012, 04:10:12 pm »

Hadn't thought about the tree branches through the top.

My lifter arm over the top is two 1-1/4" steel pipes with a right angle bend in the middle. It's the type of lifter that holds the top straight up in the air when raised. The front isn't covered, but hopefully the straps will hold that down and the middle and back should stay in place.

TwinCitiesHotSpring · « **Reply #7 on:** October 29, 2012, 05:31:26 pm »

I hope all you "east coasters" stay safe during the storm...also for reference if your in a high wind area these work well: http://www.spadepot.com/shop/Hurricane-Spa-Cover-Straps---Pair-P648C1.aspx

SnowHot · « **Reply #8 on:** October 29, 2012, 07:01:47 pm »

+++vibes+++
To you East Coasters. Having only moved here a few years ago, we have a lot of friends and family in the path of Sandy.

Stay safe.

wmccall · « **Reply #9 on:** October 30, 2012, 07:08:35 am »

As far West as I am, its not bad, but we probably won't be using the tub again till Wednesday at the earliest. Nobody wants to sit in 40mph driving rain and try to get comfortable.

Bonibelle · « **Reply #10 on:** October 30, 2012, 09:59:42 pm »

My tub fared the storm well, but my friend was not so lucky. Her cover pulled up with enough force to rip the cover lifter out. ..Glad Im a good Boy Scout and was prepared..lol!

wmccall · « **Reply #11 on:** October 31, 2012, 07:38:31 am »

As expected, we haven't been able to use the tub since Monday afternoon. Haven't checked the forecast. At least we didn't lose power and never saw more than about 40mph gusts.

Chas · « **Reply #12 on:** October 31, 2012, 06:16:10 pm »

I was looking for the "Like" button...

Bonibelle · « **Reply #13 on:** October 31, 2012, 07:48:12 pm »

Yeah, Craig...can you give us a like button..lol!

wmccall · « **Reply #14 on:** November 01, 2012, 06:56:44 am »

Still some light rain, but we used the tub last night anyway. We might see sun tomorrow.

Hot Tub Forum · « **Reply #14 on:** November 01, 2012, 06:56:44 am »

Hot Tub Forum

News: