What's the Best Hot Tub

Author Topic: Programming a Thermospa Concord Elite  (Read 3595 times)

bwg

  • Junior Member
  • *
  • Posts: 1
Programming a Thermospa Concord Elite
« on: April 15, 2012, 10:17:26 am »
I wonder if anyone can help me with programming a Thermospa Concord Elite.  I have read the manuals and cannot figure out how to get pump 1 to shut off.  The directions are not clear at all and I am beside myself.  Or maybe someone knows directions to less complicated instructions.
Any help or guidance will be greatly appreciated.

Hot Tub Forum

Programming a Thermospa Concord Elite
« on: April 15, 2012, 10:17:26 am »

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Programming a Thermospa Concord Elite
« Reply #1 on: April 15, 2012, 11:52:49 am »
  On most spas you just push the pump btn  ;)  press once for low speed, press again for high speed, once more it shuts off.    If you don't have a circulating pump, small pump that runs 24/7 then pump one will run on low speed when the unit is calling for heat.   If you have your spa set to 104, the pump will run more often to maintain that temp.  If you drop the temp down to say 80 then it should shut off.     If you just filled it, the pump should run till the desired temp is reached then shut off.    Is that what its doing??

Hot Tub Forum

Re: Programming a Thermospa Concord Elite
« Reply #1 on: April 15, 2012, 11:52:49 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42