Author Topic: HELP! Hot tub issue (Read 3840 times)

westgass · « **on:** February 25, 2011, 07:33:08 pm »

Hi there - hoping someone can help!! Cold weather (at least for California

and want to hop in the tub!!
However in the summer - noticed that the temperature gauge was off, was reading 101 however was approx 106 when we took the temperature with an external thermometer. Following that - in October we started to get the FL1 error (not sure what that means - however the "jet 1" would no longer circulate (the second jet will still circulate). FOLLOWING THAT - I went out last week and the temperature of the water was about 51 degrees! HELP!!! Can anyone help with a suggestion of what the potential issue would be and how I can fix?? Thank you so much for your advice!

Hot Tub Forum · « **on:** February 25, 2011, 07:33:08 pm »

Jacuzzi Jim · « **Reply #1 on:** February 25, 2011, 07:40:28 pm »

FL1 can be a couple things from a clogged filter to a bad circ pump. Try removing the filter first kill the power then force water through it (the fitting) to clear a possible air lock. What brand spa is it?

westgass · « **Reply #2 on:** February 25, 2011, 07:51:54 pm »

Hi Jim - will give it a try. Believe it or not - I don't know the brand! We bought the house 4 years ago and spa was here already - have taken off the side paneling to see if could find and never have been successful. I tried the hose method with the power on, so will turn off and give try!

westgass · « **Reply #3 on:** February 25, 2011, 07:59:18 pm »

No go - powered down, ran hose against the screen for a couple minutes. Powered back on and FL1 error still there. When you try and run the Jet 1 - you just hear a "click click"...jet doesn't go...additional thoughts?

Jacuzzi Jim · « **Reply #4 on:** February 25, 2011, 08:04:45 pm »

The pump may have gone out if you hear it clicking and nothing is happening, how many pumps does it have any idea?

westgass · « **Reply #5 on:** February 25, 2011, 08:11:34 pm »

No - can you give me a tip on how to figure it out (can you tell I'm new to the hot tub scene?

Jacuzzi Jim · « **Reply #6 on:** February 25, 2011, 08:29:12 pm »

You would have to open up the front and look. If it's clicking possible it's just a blown fuse. Without a volt meter you won't be able to tell if it's bad or not.

SpaGuy911 · « **Reply #7 on:** March 09, 2011, 09:32:08 pm »

its possible your sensors are going or gone bad. how old is the spa what kind is it?

Hot Tub Forum · « **Reply #7 on:** March 09, 2011, 09:32:08 pm »

Hot Tub Forum

News: