Author Topic: water hardness (Read 2374 times)

Memories_Galore · « **on:** November 12, 2008, 07:05:01 pm »

water hardness is my problem. I added too much chemicals to bring it up, now I think it's too high. It is at 600. What can I do exept to drain some water and add plain water? Any help, please.

Thanks in advance.

Hot Tub Forum · « **on:** November 12, 2008, 07:05:01 pm »

Jacuzzi Jim · « **Reply #1 on:** November 12, 2008, 07:59:23 pm »

You can drain some water out and refill.

You would probably be ok with it if you wanted to leave it and just use the tub refill as needed its up to you.

Memories_Galore · « **Reply #2 on:** November 13, 2008, 11:36:09 am »

Thanks for the info. I think I will take your advice and just refill as needed.

tony · « **Reply #3 on:** November 13, 2008, 12:34:33 pm »

If you leave as is, be sure your pH does not get above acceptable levels as scaling can occur.

Memories_Galore · « **Reply #4 on:** November 13, 2008, 07:13:53 pm »

thanks for telling me about the PH level. It's good for now, I will keep checking it.

Hot Tub Forum · « **Reply #4 on:** November 13, 2008, 07:13:53 pm »

Hot Tub Forum

News: