What's the Best Hot Tub

Author Topic: Jacuzzi J230 heating problem  (Read 5539 times)

SSS UK

  • Junior Member
  • *
  • Posts: 4
Jacuzzi J230 heating problem
« on: June 10, 2018, 03:36:23 pm »
Hi everyone.

Can anyone tell me if their Jacuzzi J230 heater still works when the high speed on the pump is activated?

I have found that once we press for full speed the heater light goes out  :-\

This is no good to us as we use the spa in winter and it soon gets cold!

any info on how to rig it if this is by design would be gratefully received  :)

Regards,

Paul "SSS UK"

Hot Tub Forum

Jacuzzi J230 heating problem
« on: June 10, 2018, 03:36:23 pm »

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Jacuzzi J230 heating problem
« Reply #1 on: June 10, 2018, 11:40:56 pm »
 Is it a 1 pump or two pump spa?   The original 230 only had one if I remember right, then went to two.   The 235 and 245 have two.   A lot depends on the size of your breaker. 

Marco P

  • Junior Member
  • *
  • Posts: 36
Re: Jacuzzi J230 heating problem
« Reply #2 on: June 11, 2018, 12:06:12 am »
most of the time if it is on 120, the heater will turn off when the jet pumps are on high. is it a 120 or 240 volt spa?

SSS UK

  • Junior Member
  • *
  • Posts: 4
Re: Jacuzzi J230 heating problem
« Reply #3 on: June 12, 2018, 04:38:29 am »
most of the time if it is on 120, the heater will turn off when the jet pumps are on high. is it a 120 or 240 volt spa?

Hi, it is a 240v spa?!

SSS UK

  • Junior Member
  • *
  • Posts: 4
Re: Jacuzzi J230 heating problem
« Reply #4 on: June 12, 2018, 04:41:01 am »
Is it a 1 pump or two pump spa?   The original 230 only had one if I remember right, then went to two.   The 235 and 245 have two.   A lot depends on the size of your breaker.

Hi, it is a single pump model?!

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Jacuzzi J230 heating problem
« Reply #5 on: June 12, 2018, 07:54:09 pm »
Is it a 1 pump or two pump spa?   The original 230 only had one if I remember right, then went to two.   The 235 and 245 have two.   A lot depends on the size of your breaker.

Hi, it is a single pump model?!

  If it's a 50 amp breaker it should probably stay on when in high with only 1 pump.    What's the breaker say on it? 

Marco P

  • Junior Member
  • *
  • Posts: 36
Re: Jacuzzi J230 heating problem
« Reply #6 on: June 13, 2018, 12:57:17 pm »
yeah. seems strange for 240v-50a service. it would make sense to turn it off if it is in 240V-30a service.
it is also possible it is programmed wrong so...

Sam

  • Senior Member
  • ****
  • Posts: 1335
Re: Jacuzzi J230 heating problem
« Reply #7 on: June 13, 2018, 04:06:18 pm »
Could be a dipswitch setting

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Jacuzzi J230 heating problem
« Reply #8 on: June 13, 2018, 04:45:12 pm »
  It shouldn't have DP switches but it does have the jumpers.   If not the original owner, it's possible they had it set for 30 amp?   I just don't remember if there is a jumper for that?  Been awhile..

Hot Tub Forum

Re: Jacuzzi J230 heating problem
« Reply #8 on: June 13, 2018, 04:45:12 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42