Author Topic: Nature2 and Shock and PH (Read 3165 times)

brian_tr · « **on:** August 12, 2004, 04:24:47 pm »

I know Bromine and Nature2 are not compatable. When I have my water tested after using Spa Shock it shows up around 5 on Bromine when they test it. The shock ingredient is Potassium Peroxymonosulfate. It does not show up on my test strips however. Is there a problem using the spa shock with nature2?

Hot Tub Forum · « **on:** August 12, 2004, 04:24:47 pm »

huh? · « **Reply #1 on:** August 12, 2004, 05:03:04 pm »

Some spa shocks are known to also have sodium dichlor (chlorine) or sodium bromide (bromine) as an ingredient. Are either of these listed?

brian_tr · « **Reply #2 on:** August 13, 2004, 01:42:12 pm »

Just has other ingredients listed. Is this shock considered MPS?

wmccall · « **Reply #3 on:** August 13, 2004, 03:36:35 pm »

Quote

I know Bromine and Nature2 are not compatable. �PeroxyMonoSulfate. �

What you have thier is PMS

Chas · « **Reply #4 on:** August 13, 2004, 04:57:19 pm »

"MPS."

Actually, while it is possible that a person named BRIAN might have PMS, I highly doubt it.

Netnutty · « **Reply #5 on:** August 13, 2004, 06:39:34 pm »

Thanks Chas!!!!

I was cracking up with that one!

Netnutty

Shut_Down_Stranger · « **Reply #6 on:** August 13, 2004, 11:02:48 pm »

Potassium Peroxymonosulfate will not show up on most color indicators. The active ingediant in the test strip is dpd which is not sensitve to the chemical. If your test for chlorine or bromine is purple it is dpd.

Dr. Spa� Ret. · « **Reply #7 on:** August 13, 2004, 11:31:26 pm »

chlorine, bromine and most shocks will "show" a reading for bromine (as well as chlorine), but that DOESN'T mean it's actually in the water.

Hot Tub Forum · « **Reply #7 on:** August 13, 2004, 11:31:26 pm »

Hot Tub Forum

News: