Author Topic: Repair assistance requested (Read 2248 times)

gw99 · « **on:** June 05, 2015, 08:28:24 am »

Hello,

I recently purchased a sundance maxxus (2006) used. While installing electrical, a hose fitting was knocked off of pump #2. I will try to attach pictures. It looks like the plastic itself broke. Can someone please assist me in the best way to fix this myself?

Hot Tub Forum · « **on:** June 05, 2015, 08:28:24 am »

Kev B · « **Reply #1 on:** June 05, 2015, 09:15:20 am »

I think it is 1/4 inch in diameter threads and 3/8 inch barb.....usually you can tap a screwdriver into it and unscrew it. If not, you can drill it out and use a tap to re-thread it.

Dr. Spa� Ret. · « **Reply #2 on:** June 05, 2015, 11:38:46 am »

Or a larger screw extractor.

Spatech_tuo · « **Reply #3 on:** June 05, 2015, 06:49:31 pm »

Quote from: Dr. Spa� Ret. on June 05, 2015, 11:38:46 am

Or a larger screw extractor.

That'll do it!

Tman122 · « **Reply #4 on:** June 05, 2015, 07:59:18 pm »

The company I work for has extractors up to 4"

Kev B · « **Reply #5 on:** June 07, 2015, 09:56:36 am »

Those are nice guys, but they usually come right out before you would have time to get to the truck to get the extractor

Hot Tub Forum · « **Reply #5 on:** June 07, 2015, 09:56:36 am »

Hot Tub Forum

News: