What's the Best Hot Tub

Author Topic: wiring question  (Read 2465 times)

mowin

  • Junior Member
  • *
  • Posts: 7
wiring question
« on: May 04, 2014, 07:34:45 pm »
Where my tub will be going, there is a 220v 50 amp outlet wired to my main panel(50' away) with 8-4 copper wire.  I plan on switching the outlet to a disconnect box with a 50 amp gfci. This disconnect box will be about 10' from the tub.  Should I use 6-4 from the disconnect to the spa? Or match the 8-4?

Hot Tub Forum

wiring question
« on: May 04, 2014, 07:34:45 pm »

rosewoodsteel

  • Full Member
  • ***
  • Posts: 500
Re: wiring question
« Reply #1 on: May 04, 2014, 08:25:00 pm »
Mowin, 6 4 sounds good to me.   I think, however, the disconnect should be not less than 5' from the tub.    I'm sure others will chime in on this.

Dr. Spa™ Ret.

  • Ultimate Member
  • *****
  • Posts: 3377
  • Retired (mostly) from the industry after 33 years
Re: wiring question
« Reply #2 on: May 04, 2014, 08:29:08 pm »
10' is not less than 5'       ;-)
If you can't sell it on eBay, it may not even qualify as landfill.

Retired (mostly) from the industry after 33 years...but still putzing around with a consumer information website, and trying to sell obsolete owners manuals

Topline Mike

  • Full Member
  • ***
  • Posts: 240
Re: wiring question
« Reply #3 on: May 04, 2014, 08:39:11 pm »
This information might be in your owners manual.

My jacuzzi reads:  "When using wire larger than #6, add a junction box near the spa and reduce to short lengths of #8 wire to connect to the spa".

Hot Tub Forum

Re: wiring question
« Reply #3 on: May 04, 2014, 08:39:11 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42