What's the Best Hot Tub

Author Topic: Question for Dealers  (Read 4613 times)

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Question for Dealers
« on: May 28, 2004, 01:13:21 pm »
This is a repeat from the Artesian topic, but I wanted to put in here in case some of you didn't read that thread.

 

To those of you dealers, do you recognize who makes these jets?  I'd love to look at a catalog and see what else is available.  
Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

Hot Tub Forum

Question for Dealers
« on: May 28, 2004, 01:13:21 pm »

ZzTop

  • Full Member
  • ***
  • Posts: 463
  • Beachcomber 550x owner
Re: Question for Dealers
« Reply #1 on: May 28, 2004, 02:52:45 pm »
Bill I am not a dealer but have a look at this link
http://db.waterwayplastics.com/catalogpdf/catalogaccess.html regards Zz

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Re: Question for Dealers
« Reply #2 on: May 28, 2004, 03:25:19 pm »
Quote
Bill I am not a dealer but have a look at this link
http://db.waterwayplastics.com/catalogpdf/catalogaccess.html regards Zz



Thanks for the link.  Apparently Dynasty uses a lot of Waterways products. I recognized my waterfall there, and read the spec sheet on it and found it has a "replaceable blade" so if the flow gets messed up down the road, I may attempt a repair.

I know my pumps are waterways, so I'll have to look up the model number and see what the HP rating is (Dynasty calls them 7HP, but lets not start that argument  ;D )

AndI did find the jets I was looking for, so thanks, even if your not a dealer, now back to check to see if they sell to the public, or at the very least I can tell my dealer excactly what to order for me.
« Last Edit: May 28, 2004, 03:33:54 pm by wmccall »
Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

Gary

  • Full Member
  • ***
  • Posts: 746
  • Laugh daily you will live longer
Re: Question for Dealers
« Reply #3 on: May 28, 2004, 06:12:43 pm »
Looks like cheap Waterway jets to me. I am constantly replacing Waterway jets for customers. If you do not need I would stay away.

Gary
I am a scientist, I convert beer, wine and whiskey into urine.

Steve

  • Ultimate Member
  • *****
  • Posts: 3196
Re: Question for Dealers
« Reply #4 on: May 29, 2004, 12:15:11 am »
Gary is correct that Waterways had some issues where jets weren't staying in. They addressed this months ago and now are flawless.

Waterways makes some great therapy jets and I strongly recommend them now. The stainless steel I could do without though... ??? I like the low maintenence of the grey plastic instead.

Steve

ZzTop

  • Full Member
  • ***
  • Posts: 463
  • Beachcomber 550x owner
Re: Question for Dealers
« Reply #5 on: May 29, 2004, 05:52:35 pm »
Quote


AndI did find the jets I was looking for, so thanks, even if your not a dealer, now back to check to see if they sell to the public, or at the very least I can tell my dealer excactly what to order for me.


Bill here are some net resellers of Waterways products.

Note:  If you are using Waterways products you should be able to use their  hand held jet.

http://www.spanetwork.com/Jets-Waterway_Jets.html

http://www.poolandspa.com/catalog/category000492.cfm

http://www.spadepot.com/warehouse/parts.htm

http://www.hottubessentials.ca/jet_internals.asp

Regards Zz




Hot Tub Forum

Re: Question for Dealers
« Reply #5 on: May 29, 2004, 05:52:35 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42