Author Topic: Spa Pads? (Read 5720 times)

mouth · « **on:** January 06, 2011, 10:38:15 am »

Anyone have any luck using Spa Pads? I live in Michigan, so it is not possible right now to poor concrete, but am thinking of getting a tub.

Hot Tub Forum · « **on:** January 06, 2011, 10:38:15 am »

soak-king · « **Reply #1 on:** January 06, 2011, 12:50:35 pm »

We've used them on a few occasions with no problems. You just need a level area to put them, preferably sandy.

paulsimmons · « **Reply #2 on:** January 06, 2011, 02:26:23 pm »

I haven't observed problems with them either. I have a friend that has used them and been satisfied.

Spa Guy Dave · « **Reply #3 on:** January 08, 2011, 08:23:20 pm »

I have used them on several ocassions and have been pleased with the results. As stated earlier, the ground surface must be level. I prefer the EZ Pad. It only has 4) 4'x4' Foot Pieces, which fasten together with strong brackets. The Ez Pad has a strong extruded design. You can build the base, then easily carry it to the proposed area or flip it over in place. Goodluck.

headnsouth · « **Reply #4 on:** January 15, 2011, 10:33:52 am »

I framed out my area in 6x6 PT lumber and filled it with stone. It was a cheap and fairly easy install and movable if I ever need to.

Jet Sitter · « **Reply #5 on:** January 15, 2011, 05:39:53 pm »

One of my neighbors with a tub says his wife always wears one when she gets in.

soak-king · « **Reply #6 on:** January 17, 2011, 11:05:37 am »

Quote from: Jet Sitter on January 15, 2011, 05:39:53 pm

One of my neighbors with a tub says his wife always wears one when she gets in.

LOL

rick_in_cleveland · « **Reply #7 on:** January 21, 2011, 04:05:54 pm »

I've had my tub on an EZ pad for 6 years with no problem. Just make sure you use construction grade sand as a base and not play sand

SpaGuy911 · « **Reply #8 on:** March 09, 2011, 09:27:00 pm »

Quote from: Jet Sitter on January 15, 2011, 05:39:53 pm

One of my neighbors with a tub says his wife always wears one when she gets in.

Yes!!!! thats what i;m talking about

Hot Tub Forum · « **Reply #8 on:** March 09, 2011, 09:27:00 pm »

Hot Tub Forum

News: