What's the Best Hot Tub

Author Topic: Calspas Ozone Generator Hose Problem  (Read 2247 times)

gutnick

  • Junior Member
  • *
  • Posts: 1
Calspas Ozone Generator Hose Problem
« on: January 04, 2010, 03:52:20 am »
The hose to my Ozone generator appears to be clogged.  Has anyone ever had to unclog one?  I tried using a long wire, but it doesn't seem to unblock.  In the hose, there is a yellowish wax build up.  Any idea?  Thank you.

Hot Tub Forum

Calspas Ozone Generator Hose Problem
« on: January 04, 2010, 03:52:20 am »

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Re: Calspas Ozone Generator Hose Problem
« Reply #1 on: January 04, 2010, 09:14:20 am »
Welcome to the forum, I have heard that talked about before, I'm sure one of our more technical users will have some input.
Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

Peteyboy

  • Junior Member
  • *
  • Posts: 35
  • 1991 HotSpring Classic - Tech since 1987
Re: Calspas Ozone Generator Hose Problem
« Reply #2 on: January 04, 2010, 09:24:00 am »
Some of the ozone tubes I've run into have a liner inside that breaks down and will clog. Just replace the tubing, remember to run it with a loop above the water line and install a check valve. Most ozone tubing is 1/4" vinyl.
spas are electrical devices and can be dangerous to repair - please use this advice at your own risk

Hot Tub Forum

Re: Calspas Ozone Generator Hose Problem
« Reply #2 on: January 04, 2010, 09:24:00 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42