Author Topic: heater questions ,,,,,,,,Balboa (Read 2888 times)

mopar383 · « **on:** October 13, 2009, 09:19:37 pm »

Hi guys I have a hot tub with a balboa heater. Over the summer it tripped the gfi.I messed around with and after unhooking the heater it stopped tripping.Ive since bought a new heater and was installing tonight and ran into some problems.I hooked it inline and started the hot tub. It ran but after about 20 minuets without heating i touched the metal part of the heater. It shocked me and tripped the gfi. So I thought maybe it needed the mounts as a ground.I bolted the mounts on and this time it tripped the gfi and the main. Do I have something hooked up wrong? There are two wires on the pressure switch and the two that are on the heater do I have some backwards Please help as its getting cold here and I need to get it working before it freezes thank you !!!

Hot Tub Forum · « **on:** October 13, 2009, 09:19:37 pm »

Gary · « **Reply #1 on:** October 14, 2009, 01:22:06 pm »

Sounds like the heater you bought is defective, disconnect it and see if the breaker holds.

mopar383 · « **Reply #2 on:** October 14, 2009, 06:45:35 pm »

That may be .....anyone got a Balboa 50067 laying around I can borrow or buy cheap ? Thanks

Dr. Spa� Ret. · « **Reply #3 on:** October 14, 2009, 08:16:11 pm »

Can you post a LARGE and CLEAR picture?

mopar383 · « **Reply #4 on:** October 14, 2009, 09:11:15 pm »

here it is

Hot Tub Forum · « **Reply #4 on:** October 14, 2009, 09:11:15 pm »

Hot Tub Forum

News: