Hot Tub Forum
Original => Hot Tub Forum => Topic started by: GILBERTA on May 25, 2007, 03:42:11 pm
-
I have a leak were the heater is. I then turned off to the hot tub and it stop leaking
-
check to see if the unions are tight enough around the housing they may not be tight enough cross threaded or the gasket is cracked or pinched.
-
Lots of places water can leak at the heater:
1. Check union gaskets (replace)
2. Pressure Switch (replace)
3. Heater studs (replace heater)
4. Heater housing (replace heater housing)
Most of the the time it is either the studs or pressure switch.
-
looks like the housing is cracked the housing around the heater. Can i just buy a housing or can i just epoxy it
-
also were can i get one Thanks for all the help. Do i need to drain the tub to fix this