Hot Tub Forum
Original => Hot Tub Forum => Topic started by: apple on April 06, 2007, 03:27:48 pm
-
My PH was at 7.9 and my TA was at 40. I put in PH down and now my readings are PH 7.5 and TA 33. What should I do to raise the TA and not the PH?
-
Add Baking Soda in one TBS increments until alk is at a level where your pH remains constant. Don't worry about how high or low your alk is as long as pH remains steady.
I usually wait a day between doses.
-
Add Baking Soda in one TBS increments until alk is at a level where your pH remains constant. Don't worry about how high or low your alk is as long as pH remains steady.
I usually wait a day between doses.
Soon you will need a photo id to balance your water.
Man, some lawmakers are idoits:
http://www.kmov.com/localnews/stories/kmov_localnews_070405_bakingsoda.3618f4f3.html
-
Soon you will need a photo id to balance your water.
Man, some lawmakers are idoits
Well, on that note, I'm off for a friday night soak.
Guess I'll leave the wine in the bottle and just snort some baking soda while I can still get it OTC.
BTW, what are my body's pH and Alk supposed to be?
I don't want to do too much, cause that Spa Down stuff is harsh!
;)
-
Soon you will need a photo id to balance your water.
Man, some lawmakers are idoits:
http://www.kmov.com/localnews/stories/kmov_localnews_070405_bakingsoda.3618f4f3.html
Thanks for the link Drewster.
Do you read our local news often?
I can't believe they actually think that will help with the drug problems here in the STL. :-/ What a bunch of idiots.
-
Add Baking Soda in one TBS increments until alk is at a level where your pH remains constant.
I usually wait a day between doses.
Some of the better chemical companies no longer use sodium bi-carbonate (baking soda) as a total alkalinity increaser. The problem is that it raises the ph as well as the t/a. Spend just a couple bucks more and it will make your life much easier
Don't worry about how high or low your alk is as long as pH remains steady.
If your ph is 7.5 and your T/A is 40, then your water is acidic. This is one of the quickest ways to find out how much a new heater is going to cost you.
-
Some of the better chemical companies no longer use sodium carbonate (baking soda) as a total alkalinity increaser. Â The problem is that it raises the ph as well as the t/a. Â Spend just a couple bucks more and it will make your life much easier
If your ph is 7.5 and your T/A is 40, then your water is acidic. Â This is one of the quickest ways to find out how much a new heater is going to cost you.
:-? Are you confusing sodium carbonate (soda ash/pH up) with sodium bicarbonate (baking soda/alk increaser)? Â Although both raise pH and TA... the carbonate is a higher pH product and raises pH more than alk, while bicarb does the opposite. Â What do you recommend for "a couple of bucks more"?
I also don't understand the statement that water with a pH of 7.5 is acidic. Â 7.0 is considered neutral, so please elaborate.
-
yes I forgot the "bi" in my carbonate
If you T/A is at 40 yes your water is corrosive and will damage your heater. Even if your ph is high it will still damage your equipment
Try sodium hydrogen carbonate for one.
-
If you T/A is at 40 yes your water is corrosive and will damage your heater. Â Even if your ph is high it will still damage your equipment
What is the scientific reasoning for this?
I still don't understand. I'm just curious as to what makes water so corrosive when pH is stabilized at 7.5 with a low alkalinity.
Thanks
-
What is the scientific reasoning for this?
I still don't understand. I'm just curious as to what makes water so corrosive when pH is stabilized at 7.5 with a low alkalinity.
Thanks
I'm not a scientist, (I just play one on the internet) It goes back to a scale called the saturation index. The sum of 12 tests will determine if the water is corrosive or not. To just look at the ph test is very much like a litmus test for the overal acidity of the water. When dealing with a public spa or pool the health department requires documentation of T/A as well as PH. If you only pay attention to the ph, you will most likely have chemical damage to your spa in a few years.
-
...Try sodium hydrogen carbonate for one.
That is sodium bicarbonate (baking soda). Perhaps your "better chemical companies" just use that name so they can charge "a couple bucks more" for it. :P
-
...It goes back to a scale called the saturation index. Â The sum of 12 tests will determine if the water is corrosive or not...
What are the 12 tests? Â pH, TA, Hardness, and Temperature are commonly used to determine water balance... what else? The "Saturation Index" refers to water's capacity to hold calcium in solution. While balanced water can provide some protection by allowing a thin layer of calcium to form on sensitive components... it really is not an indication of the corrosiveness of the water itself.
I've never seen anything that would indicate that a pH of 7.5, TA of 40, and a reasonable hardness would lead to problems with anything other than a plaster/cement pool or a non-alloy heater.
-
That is sodium bicarbonate (baking soda). Perhaps your "better chemical companies" just use that name so they can charge "a couple bucks more" for it. :P
Chemical make up according to NTSB:
NAHC03 = Sodium Bi-Carbonate
NAH2C03= Sodium Hydrogen Carbonate
Same family of chemicals but there is a slight differance.
-
Chemical make up according to NTSB:
NAHC03 = Sodium Bi-Carbonate
NAH2C03= Sodium Hydrogen Carbonate
Same family of chemicals but there is a slight differance.
I googled sodium hydrogen carbonate and only found references to sodium bicarbonate (to be fair, I only looked at the first page of listings). Can you direct us to your source of this info? I tried the NTSB, but only found MSDS showing sodium hydrogen carbonate and sodium bicarbonate as the same thing.
It has been a long time since my college chemistry, but since Na+ and HCO3- balance out, it would appear that NaH2CO3 would have an extra hydrogen atom, making it unstable.
-
Reese I have to admit that I didn't look that up. I may have misquoted that formula. I got that from the wholesale house that I purchase those items from. They were the ones that explained it to me and showed me the diferences. They are closed untill monday but I can ask for the documentation and post it then.
On another note, I am impressed that you can remember all that stuff from chemistry. I can't for the life of me remember all those elements and formulas.
-
My PH was at 7.9 and my TA was at 40. Â I put in PH down and now my readings are PH 7.5 and TA 33. Â What should I do to raise the TA and not the PH?
Apple,
This is the same thing I see in our tub, from what I have been able to find out, its the air injection that causes it, So if your tub has a diverter valve for air injection you should turn it off when your not in it.
You can raise your alkalinity slowly until your pH is stable by adding baking soda. I have found that our tub seems to behave better with the alkalinity on the low side ( around 80 ) as opposed to the recommended 100. Once you get your alk. in range your pH should stabilize and you can make minor adjustments
Good luck
-
I have added 1 TBS of baking soda a day. Yesterday my TA was 50 and PH 7.5. Today it is TA 41 and PH 7.6. Â What causes the levels to fluctuate? Â I do turn off the air injectors we are not in it because I thought it might help with heat loss. I am adding another TBS of baking soda. Thanks for the advice,
                           Judy
-
I have added 1 TBS of baking soda a day. Yesterday my TA was 50 and PH 7.5. Today it is TA 41 and PH 7.6. Â What causes the levels to fluctuate? Â I do turn off the air injectors we are not in it because I thought it might help with heat loss. I am adding another TBS of baking soda. Thanks for the advice,
                           Judy
Keep doing what you've been doing and pretty soon your levels will stabilize. It's all about finding [glow]your[/glow] water's specific alkalinity level that will allow for stabilization to occur.
Since 1 TBS seems to only be bringing your alk up slightly try adding 2 TBS a day. Be sure not to test your pH level when FC is above 5 ppm and after having your jets on for an extended period of time. This will help ensure more accurate readings.
-
When I tested this morning my levels were TA 47 and PH 7.9. I needed to add some more water so I didn't put in any baking soda. Tested again tonight and have TA at 65 and PH at 8.1. I put in a TBS of PH down. I hope that was I was suppose to do. Any suggestions?
-
What are you using to test TA that gives readings down to single digits? What is your hardness?
FWIW, I would focus on getting the pH where you want it and ignore TA unless pH starts to bounce around. As you can see... in some water, trying to get both pH and TA in recommended ranges results in a tail-chasing exercise of acid and baking soda doses that may never end.
-
I am using my new aqua-check digital. I kind of figured my reading were off using the test strips because I couldn't really tell what color I was looking at, but I hesitated getting the digital reader as well as the Taylor kit because of my tendency to go OCD. On the bright side my water is clear and doesn't smell bad or leave me itchy.
-
Apple, Is your bromine real high by any chance?
-
No, it's actually on the low side. When I first filled the tub my TA was low and my PH was high. It 's like Reese said I have been on a PH down/ baking soda merry-go-round from the beginning. I am going to take a water sample down to my dealer today. I can have him test the hardness since it is not on the Aqua-check.
-
I am using my new aqua-check digital. I kind of figured my reading were off using the test strips because I couldn't really tell what color I was looking at, but I hesitated getting the digital reader as well as the Taylor kit because of my tendency to go OCD. Â On the bright side my water is clear and doesn't smell bad or leave me itchy.
Get the taylor k-2005. It's worth it's weight in gold. I'm OCD as well, that's why I have one. Just tell yourself to only test CC and pH once a week and alk when pH needs adjusting and you'll be fine.
-
...I got that from the wholesale house that I purchase those items from. Â They were the ones that explained it to me and showed me the diferences. Â They are closed untill monday but I can ask for the documentation and post it then...
Micah, since you are on the board today, did you ever get information on the difference (or lack thereof ;)) between sodium bicarbonate and sodium hydrogen carbonate?
-
I think my aqua test reader is defective! I took my water to the dealer and he said it was perfect. I tested three different times with the digital reader and got three completely different readings.
-
I think my aqua test reader is defective! I took my water to the dealer and he said it was perfect. Â I tested three different times with the digital reader and got three completely different readings. Â
Taylor k-2005
Order here http://www.rhtubs.com/store/test-kits.htm
-
I think my aqua test reader is defective!... Â
There was a thread about problems with the Aqua-Check reader a couple of weeks ago. I don't think it has been resolved, but they were thinking it might be a bad lot of test strips.
-
I actually got the digital test reader from RhTubs. I called them and they said there would be no problem in exchanging it for the Taylor Kit :) :).