Hot Tub Forum
Original => Hot Tub Forum => Topic started by: Fitnessaddict on September 15, 2006, 02:59:35 pm
-
Hi Fellow Hottub lovers,
We bought a tadpole (bullfrog series) hottub this August. Well we also put in a saltwater inground pool The pool has been great to maintain, however the tub has been cloudy yet testing fine the whole time. Sooo.... we decide to go saltwater for 600 dollars, ouch but what is anther 600 at this point of nearly 28 thousand LOL. The water is clear as clear can be, but once again there is this problem with the maintaining. "Tubby" sells this system which I believe is out of Calgary and you put one of these "pucks" in before you go in and one in after. Well the pucks are about a dollar a piece :o. I use my hottub nearly everyday, that adds up. One of the reasons we got it is because I teach 13 fitness classes a week and am sore, so the massaging is a big relief. The pucks contain potassium hydrogen peroxymonosulfate and sodium carbonate. Does anyone have any idea how we could "make" our own tablets or what amount we would need and where we would get the chemicals to add freely on their own.
Thanks in advance,
Fitnessaddice :)
-
Fitnessaddict,
Sorry nobody has piped up here, probably cause saltwater in hot tubs is still new. I wish I could help but, I don't know much about salt water tubs. I did look into using it in our pool but haven't got very serious about it yet. The dealer we got our tub from(also a Bullfrog) sells the Tubby generator and has mentioned it to me but I think I want to try it in the pool first.
-
Wouldn't the salt severely diminish the service life of the pumps & heater? I'm thinking of how quickly salt water would tear up jetskis if they weren't frequently flushed with fresh water. I owned one a few years back that saw a lot of salt water before I owned it. Had to replace so many parts in the first 2 years that I could have just bought another one.
-
The salt in a saltwater pool or spa is at a much lower level than what would be found in the ocean. About the same salinity as a teardrop.
-
If you have access to Dichlor or whatever. This will help...http://www.scarritt.com/spasanitizing.htm
Also check Doc's site. Rhtubs.com
My pool's salt as well. There's nothing close to that for tubs. Not that I trust or have experience with. Section A of my sanitizing page works great with Dichlor chlorine.
Oh, and for the busy bodies, nothing on my sanitizing page is copied from anyone's site. If you want to copy mine you'll have to print it out and re-type it. It's imbedded. :)
-
Thanks for all the replies, I'll look up the info later today. I have a class to torture ;D this morning (oops I meant teach). Have a great day everyone! :)
Fitnessaddict
-
The best thing about a salt water tub (and I guess a pool with an electric heater) is you'll know when the heater goes bad and the ground fault doesn't work ... ZAP, ZAP, ZAP!!! :o :D
-
From what I've heard, the part of the problem is the hot water as well as the corrosiveness of salt. Apparently, the two together just don't work that great. There are folks out there trying to perfect it - and perhaps they will - but for now, I'd stay away from salt for now.
The other part is the salt water can effervesce and cause throat irritation. It can be similar to biguanides when they are used inside. So, the comfort of the tubber is a problem, too.
Since you use your spa so much, you will probably need to keep a bit more chlorine residual in the spa for the chems to keep up. Stick with dichlor, ozone and silver and you should have a great clear spa.