Hot Tub Forum
Original => Hot Tub Forum => Topic started by: jgirvine on August 06, 2006, 03:42:11 pm
-
How long after shocking till we can use the spa again? Thanks
-
I usually wait at least two hours.
-
All depends on what you're shocking with.
-
All depends on what you're shocking with.
Leisure Time Renew......
Thanks
-
All depends on what you're shocking with.
If you use MPS to shock with you can use the tub in as little as 15 minutes, I usually wait 1 hour. If you are using chlorine based shock you should wait until the residual is back down to around 3ppm
-
Don't shock prior to going in! Make sure you have a decent sanitizer residual prior to but shock once you're done instead! Makes more sense that way as shocking and using the spa defeats the purpose really...
Steve