Hot Tub Forum

Original => Hot Tub Forum => Topic started by: spahopeful on April 13, 2006, 11:07:41 am

Title: Stereo Remote on a J385
Post by: spahopeful on April 13, 2006, 11:07:41 am

I just had a new Jacuzzi 385 installed on Tuesday!  The stereo works with the manual operation, but when I point the remote to the speakers and hit a button, the red light on the stereo blinks, but does nothing to change any stereo operations.  I only noticed this after the dealer left.  The dealer had not seen this problem and had me change the battery, but this did not help.  Any ideas?

Also, the remote shows the capacity to run a second zone of speakers.  Does anyone have information on whether this can be done with with a J385?

Title: Re: Stereo Remote on a J385
Post by: Brewman on April 13, 2006, 11:26:40 am

Sounds like a job for your dealer.  If something isn't working on a new install, they should get it right for you.
Not sure about the second set of speakers.

Title: Re: Stereo Remote on a J385
Post by: orlandoguy on April 13, 2006, 04:16:46 pm

I had the same problem on my J335 and they brought an extra remote that also didn't work.

After a tech came out, it turned out a wire was loose that I think happened during moving.  They fixed it and I have an extra remote for free.

My friend just bought a J345 and the same thing happened to his stereo.

Title: Re: Stereo Remote on a J385
Post by: spahopeful on April 18, 2006, 01:00:40 am

I took the remote to the dealer and tried it on a Jacuzzi in the store and it worked fine.  So the dealer then planned to come replace the stereo.  However, when I got home the same remote now works on my stereo.  I don't know why, but I am now enjoying music while soaking.  I'm still curious about trying to set up a second set of speakers to the zone 2 on the remote?