Hot Tub Forum
Original => Hot Tub Forum => Topic started by: tkruel on May 26, 2005, 01:34:43 pm
-
Does anyone use a cover lift? My tub came with one but have not installed it yet. Good, Bad, or ??
-
I wouldn't own a tub without one!!!
-
I haven't delivered a hot tub without installing one in 10 years. It's simple one hand off, one hand on. Simple and easy for the wife and the kids. Better than struggling with the other option of manhandling the cover.
-
'
Does anyone use a cover lift?
Absolutely. Not having a lifter becomes a pain in the a$$ not to mention the extra wear and tear.
This shouldn't even be an option.
Jc
-
I wouldn't own a tub without one!!!
Yea, what she said. Its especially great when you use the tub by your self. When its 10 degees and snowing out it helps get you back in the house quicker without having to go through snow drifts.
-
'
Absolutely. Not having a lifter becomes a pain in the a$$ not to mention the extra wear and tear.
This shouldn't even be an option.
Agreed.
Everyone once in a while I run into a new customer who's had their spa a week or two and decided to skip the lifter (probably thinking they were being offered an unnecessary item). Almost ALL realize by then that they made a mistake not getting one (unless its a tiny tub though even then its a must for me). They usually end up calling back to find out how much to get it and get it installed. The dealer will have to charge extra because now they have to send someone out especially to install rather than doing so during the delivery (or the customers ends up installing it themselves).
-
when I was looking, I thought about skipping a lifter until the sales guy said ok then take this cover off by yourself. It was so heavy and awkward, and then when you take it off, where do you put it.
I ordered one with my tub, I think it is a great investment.
-
So...how would you mount it if your hot tub is in a concrete slab?? through the sides of the skirt??
-
So...how would you mount it if your hot tub is in a concrete slab?? through the sides of the skirt??
Side of skirt is the most common, there are types that go under the tub and use the weight of the tub and 400 gallons of water to hold it in place.
I'm sure this isn't what you mean, but if I had a 2-3 person tub in a screened in room, I could see going without a cover lift, but with any bigger tub, there would be lots of days when you wouldn't use it because of the burden of messing with the cover.
-
Said in my best Obi-Wan voice:
"Use the lift, Luke."
Seriously, once you install it and use it, you'll have your answer.
Brewman
-
I debated but decided a lift was a must also.
There are different types and levels of quality of lifts so if you buy a lift make sure you get the one you want.
-
Most(?) lifters, when open, will leave part of the cover above the rim of the tub, blocking your view facing that side. Some hold the cover higher than others.
We picked out the tubed cover lifter, which even though is not the best and easiest out there, does allow the cover to sit lower.
Just pick the most undesirable view from the tub, and mount the cover to block that side.
-
Not be be the sole dissenting voice, but...
I am new to tubbing, having just received delivery of a HS Grandee about 2 months ago, without a cover lift system. We have no trouble folding the cover over and sliding it off the tub without mechanical assistance. We didn't get the cover lift because we couldn't find one that didn't leave the cover in a position that didn't obstruct the view into and/or out of the tub to the patio around the tub where people sit.
We love the tub. Use it almost everyday. The infatuation hasn't worn off. If anything we love it more than any of us expected we would. I may wish I had a cover lift when there's two feet of snow around the tub, but for now we like the flexibility of being able to easily remove the cover and get it out of the way.
Having said all that, if someone knows of a lift that somehow allows the cover to be lowered to a position where none of it sticks up past the top of the tub, I'd love to hear about it.
How's that for being wishy-washy?
-
considering the cover is two sections folding together that makes it ½ the length of the spa in the direction the cover opens. considering that most tubs are 37" to 38" high, you are always going to have some portion of the cover above the edge.
Some consider it a privacy barrier or a wind screen and place it approptriately.
The other option of course is to remove it and place it elsewhere during use.
-
That is why we did not opt for the cover lift. Our spa will be recessed slightly in the deck so not sure if the lift would have worked anyhow. We also do not like the look of the cover sitting on the back of the spa. We just as easy take the cover off and place it to the side, away from our view. The cover lift does work very well though!
-
We didn't get the cover lift because we couldn't find one that didn't leave the cover in a position that didn't obstruct the view into and/or out of the tub to the patio around the tub where people sit. if someone knows of a lift that somehow allows the cover to be lowered to a position where none of it sticks up past the top of the tub, I'd love to hear about it.
Cover Shelf.
(http://www.intheswim.com/images/cat_image/q5005.jpg)
We have a lot of homes with a view of the ocean, so this is very popular around here. It does fold up against the side of the spa when you need room, or need to walk or work in that area,
but you can leave the thing folded out so you simply flip the cover and slide the cover off the tub.
Strong, simple, inexpensive.
-
Wow, there are lots of different lifts out there. Can someone list the better models available today? I would like to know how much clearance is required and whether or not they hide away or not.
Thanks
Gombo
-
Go to Doc's site - rhtubs.com - and go into his store, look under covers and lifts. He has quite a few and he has info on most (all?) of them!
-
Wow, there are lots of different lifts out there. Can someone list the better models available today? I would like to know how much clearance is required and whether or not they hide away or not.
Thanks
Gombo
My preference would be for simplicity and minimal mechanical application.
Cover Butler is a frame that the cover will "hang" on that can be attached to the base or bottom of the spa, preferred mounting would be screwed to the deck if you are on a deck. 4-5 years from now when the cover increases it's weight from moisture, stress is applied to cabinet mounting aplications.
Cover mate is a frame that the cover will "hang on" that is attaached to the sde of the spa allowing a pivot point at the back, top of spa.
Both covers will obstruct view on the backside of the spa. This often is considered a privacy barrier or wind shield.
Hydraulic lifters are used when the cover does not have clearance behind the spa, but someone is going to break a hydraulic lifter possibly in the future.
Different lifter have different applications and you particular situation needs to be considered.
-
Thanks guys for the suggestions. I will look into all of them.