Hot Tub Forum

Original => Hot Tub Forum => Topic started by: Crunchie on February 15, 2021, 08:56:56 am

Title: Question on black plastic covers
Post by: Crunchie on February 15, 2021, 08:56:56 am

https://i.imgur.com/kIXkmn6.jpg[/img]](https://i.imgur.com/kIXkmn6.jpg) (http://[img)

Title: Re: Question on black plastic covers
Post by: Crunchie on February 15, 2021, 11:01:14 am

Sorry about this, need to upload a valid photo to show you what I need to know.  I'm experimenting with the upload feature, I read that some of you didn't know how so I'd figure I'd post and then I'll provide details, if the board allows me.

Title: Re: Question on black plastic covers
Post by: Crunchie on February 15, 2021, 11:15:41 am

Here's my question referring to the photo in my initial post,  I've got 3 of these round plastic covers at the bottom of my Dynasty model CLB7L hottub.  I've written to Dynasty spas, no answer at all so I'm reaching out.  I think it's some sort of water intake return.  Anybody can chime in, just curious on what the purpose of these are, tks.

Title: Re: Question on black plastic covers
Post by: Sam on February 15, 2021, 11:56:32 am

They are auxiliary suction intakes

Title: Re: Question on black plastic covers
Post by: Crunchie on February 15, 2021, 12:28:29 pm

Ok, any removal/cleaning needs to be done you think?  Do these suctions feed pump #2 only?  I'm pretty sure pump 1 suction is from the filter through the heater. tks

Title: Re: Question on black plastic covers
Post by: Tman122 on February 15, 2021, 01:57:16 pm

Pump one goes through the filter on low speed then uses the filter and these intakes on high speed.

Title: Re: Question on black plastic covers
Post by: Crunchie on February 15, 2021, 03:42:23 pm

thanks Tman122