Hot Tub Forum
Original => Hot Tub Forum => Topic started by: muso31 on July 18, 2019, 04:57:32 am
-
Hi all! I've noticed a leak around the O3 injector pipe in my beachcomber 321. It's a 2009. Does anybody have any ideas? It's wet above the pipe also so I assume this is coming from higher up and trickling down. It seems like a serious problem but any help would be greatly appreciated
Photo - https://photos.app.goo.gl/aovGDLu9cgb1eM4j6
(https://photos.app.goo.gl/aovGDLu9cgb1eM4j6)
..edit looking into this it appears the Jet nearest the O3 injector pipe is leaking, the O rings are very old so I may replace them
-
Hi all! I've noticed a leak around the O3 injector pipe in my beachcomber 321. It's a 2009. Does anybody have any ideas? It's wet above the pipe also so I assume this is coming from higher up and trickling down. It seems like a serious problem but any help would be greatly appreciated
Photo - https://photos.app.goo.gl/aovGDLu9cgb1eM4j6
(https://photos.app.goo.gl/aovGDLu9cgb1eM4j6)
..edit looking into this it appears the Jet nearest the O3 injector pipe is leaking, the O rings are very old so I may replace them
No expert here, but it looks like the seal between the jet and the tub. Not sure what the fix is or if there is a patching method that works.
-
Hi all! I've noticed a leak around the O3 injector pipe in my beachcomber 321. It's a 2009. Does anybody have any ideas? It's wet above the pipe also so I assume this is coming from higher up and trickling down. It seems like a serious problem but any help would be greatly appreciated
Photo - https://photos.app.goo.gl/aovGDLu9cgb1eM4j6
(https://photos.app.goo.gl/aovGDLu9cgb1eM4j6)
..edit looking into this it appears the Jet nearest the O3 injector pipe is leaking, the O rings are very old so I may replace them
Cutting out all the foam, disassemble the jet, clean the mating surfaces and replace the o-ring.