Hot Tub Forum

Brand Specific Forums => Hot Spring Spas => Topic started by: Whitepine459 on April 04, 2019, 03:40:01 pm

Title: Hot Spot display icons meaning?
Post by: Whitepine459 on April 04, 2019, 03:40:01 pm

F1, F2, night mode, and the jets icon are straightforward.

It's the "Ready" and circulation arrows that have no specific mention in the manual.

I'm guessing "Ready" means no heat demand?

What about the two arrows, like below (but in red of course)? In the bottom right of the display. I've seen them on with F1/F2 and also without, haven't figured them out. Thanks!
(https://repak.ie/wp-content/uploads/2017/08/symbol-green-dot.png)

Title: Re: Hot Spot display icons meaning?
Post by: Hottubguy on April 04, 2019, 05:32:54 pm

Means the filter cycle is on.

Title: Re: Hot Spot display icons meaning?
Post by: Whitepine459 on April 04, 2019, 08:54:24 pm

Hey thanks for the reply, so even when F1 or f2 is not showing but the arrows are, it’s in some other “filter cycle”?

Quote from: Hottubguy on April 04, 2019, 05:32:54 pm

Means the filter cycle is on.