Hot Tub Forum
Original => Hot Tub Forum => Topic started by: ccbadc on October 27, 2017, 09:18:40 am
-
I have a 06 Sundance Cameo with 1 single stage circulation pump and, 2 single stage jet pumps. one of the jet pumps started running constantly and will not turn off whether I hit the pump on/off button on the topside controller. I am assuming it is a relay that needs to be replaced on the circuit board (P/N 6600-161) but I am unsure which one it would be (K4, K5, or K6) I guess I could replace them all but if I only have to replace one I would rather do that. does anyone know which Relay(s) I need to replace?
-
I have a couple of picture to post to show what I am talking about if I am allowed to at some point.
-
Does the icon stay on or does that cycle on and off when you press the button?
-
The icon cycles on and off when I hit the button on the topside
-
First picture shows the black and white wires from the pump and the 3 relays above
(http://imageshack.com/a/img922/5946/HaWFxe.jpg)
Second picture is showing the numbering of the relays and the R-port of the black wire
(http://imageshack.com/a/img924/8769/XmWbnw.jpg)