Hot Tub Forum

Brand Specific Forums => Hot Spring Spas => Topic started by: griffj17 on December 08, 2015, 09:11:30 am

Title: Hot springs jetsetter no power
Post by: griffj17 on December 08, 2015, 09:11:30 am

I walked outside this morning to run my hot tub on the clean cycle. I noticed the gfci was tripped. I reset it and there's no power to the hot tub. I replaced the circuit board to it back in the summer and haven't had any issues until today. Can someone let me know what maybe going with this...

Title: Re: Hot springs jetsetter no power
Post by: griffj17 on December 08, 2015, 09:23:14 am

Update.
      As soon as I put a tester on it. It trips the gfci.

Title: Re: Hot springs jetsetter no power
Post by: griffj17 on December 09, 2015, 03:04:41 pm

Still having issues if anyone can help me out. Replaced the gfci, replaced the power cord. Tub starts to cycle and then trips the gfci.

Title: Re: Hot springs jetsetter no power
Post by: BullFrogSpasMN on December 09, 2015, 04:07:33 pm

faulty board, faulty heater, faulty circ pump, could be a number of things, do you have access to a volt meter? and do you know how to use it? if not it might be best to call a repair company to come look at it

Title: Re: Hot springs jetsetter no power
Post by: av8r on December 10, 2015, 08:25:59 am

Not what you want to hear, but it's pretty hard to troubleshoot when there's so little information.  A pro will understand the steps and get this resolved quickly for you.

Title: Re: Hot springs jetsetter no power
Post by: griffj17 on December 10, 2015, 11:28:38 am

I think I finally figured it out. I disconnected the high limit switches and the circulator kicked on withought tripping the gfci. The reset wasn't tripped so I'm guessing the heater is bad.