Hot Tub Forum

Original => Hot Tub Forum => Topic started by: dswilliams69 on February 16, 2015, 06:38:22 pm

Title: 2004 Sundance Altamar Logic Jumpers
Post by: dswilliams69 on February 16, 2015, 06:38:22 pm

I'm not sure if my logic jumpers on J9 are correct. There is a jumper from 1 to 3, a jumper on 5, and a jumper on 9. I am adding a jumper for the 60 amp option on 7, but I'm not sure why there is a jumper from 1 to 3, and not across 1 or across 3? Any suggestions. Thanks

Title: Re: 2004 Sundance Altamar Logic Jumpers
Post by: Kev B on February 18, 2015, 09:49:14 am

You will need a Sundance tech with the manuals or Sundance themselves for that question....so many variations out there.I have my secret contact at Sundance but I am not giving his number, sorry.

Title: Re: 2004 Sundance Altamar Logic Jumpers
Post by: Jacuzzi Jim on February 18, 2015, 11:14:35 am

 If the jumper is going up and down and not across, it's an extra jumper.   The schematic on the back side of the control box front has the info for jumpers I believe.