Hot Tub Forum

Original => Hot Tub Forum => Topic started by: jacuzzi 335 2007 on March 02, 2013, 04:43:20 pm

Title: J335 2007 model dead
Post by: jacuzzi 335 2007 on March 02, 2013, 04:43:20 pm

i have a J335 jacuzzi, 2007 model.  went out to get in it, and it was completely dead.  no lights, no error messages.  by the temp, i can tell it has been dead for at least a couple days while i was out of town.  While i was gone, there was a 3 hr power failure.  I reset the main circuit board breaker, no change.  I then went and turned off the dedicated 50 amp breaker (which had NOT gone to off position during or after the power failure), reset it, and still no change.  Hot tub completely dead.  I am assuming a fuse may have been blown, but i am not sure, and I could use the wisdom and guidance of this group.  thanks.

Title: Re: J335 2007 model dead
Post by: Jacuzzi Jim on March 02, 2013, 05:07:00 pm

  Fuse!   Least thats what I would check first, you can get them at Lowes/H,depot 25 amp.    It's the biggest one on the circuit board, green with silver tips..

Title: Re: J335 2007 model dead
Post by: jacuzzi 335 2007 on March 03, 2013, 08:37:37 am

thanks for your reply.  i have not previously opened the panels up.  Is it easy to see/find the location of the main fuse?