Hot Tub Forum

Original => Hot Tub Forum => Topic started by: cheryl on May 06, 2012, 04:22:29 pm

Title: Pacific Hot Tubs by Aber Titanium series "Titan-LT"
Post by: cheryl on May 06, 2012, 04:22:29 pm

Can anyone help me out with information on a "Titanium Series - Model Titan-LT by Pacific Hot Tubs by Aber"?  The distributor I purchased it from is out of business & manufacturer is also out of business and there is no identification numbers, etc. on the jets themselves.  They are falling out just from years of use and I ordered two different jets that I was told would work but they do not.  Does anyone have any idea where I can get the model/mfg for replacement parts for this hot tub? 

I have the owners manual but it only has the name and description of the different jets and parts w/no reference information.  Any advise would be greatly appreciated!

Title: Re: Pacific Hot Tubs by Aber Titanium series "Titan-LT"
Post by: wmccall on May 07, 2012, 07:47:30 am

Hi Cheryl,

Welcome to the forum. A few of our experts may have the answer, but if you can, post a picture of one of the jets, possibly the back side of it as well, I'll bet its a common type someone will recognize.

Title: Re: Pacific Hot Tubs by Aber Titanium series "Titan-LT"
Post by: cheryl on May 09, 2012, 06:16:07 pm

I attached pictures and descriptions of the jets.  I will get a picture of one of the actual jets asap

http://www.aquatubs.co.uk/OwnersManual.pdf

pictures are on page 10 and 11.  thanks!

Title: Re: Pacific Hot Tubs by Aber Titanium series "Titan-LT"
Post by: Jacuzzi Jim on May 09, 2012, 09:29:04 pm

 They are waterway jets and can be found from several vendors, online prices will vary.  Here is a quick link.
You want to make sure the face size is right also the back end has to match up to what you have.  If you have some with spinners I would probably stay away from those and go woth directional.

 http://spapartsnet.com/Waterway