What's the Best Hot Tub

Author Topic: Beachcomber 300 series leak  (Read 2258 times)

muso31

  • Junior Member
  • *
  • Posts: 1
Beachcomber 300 series leak
« on: July 18, 2019, 04:57:32 am »
Hi all! I've noticed a leak around the O3 injector pipe in my beachcomber 321. It's a 2009. Does anybody have any ideas? It's wet above the pipe also so I assume this is coming from higher up and trickling down. It seems like a serious problem but any help would be greatly appreciated

Photo - https://photos.app.goo.gl/aovGDLu9cgb1eM4j6



..edit looking into this it appears the Jet nearest the O3 injector pipe is leaking, the O rings are very old so I may replace them
« Last Edit: July 18, 2019, 10:47:15 am by muso31 »

Hot Tub Forum

Beachcomber 300 series leak
« on: July 18, 2019, 04:57:32 am »

bud16415

  • Full Member
  • ***
  • Posts: 857
Re: Beachcomber 300 series leak
« Reply #1 on: July 18, 2019, 11:44:53 am »
Hi all! I've noticed a leak around the O3 injector pipe in my beachcomber 321. It's a 2009. Does anybody have any ideas? It's wet above the pipe also so I assume this is coming from higher up and trickling down. It seems like a serious problem but any help would be greatly appreciated

Photo - https://photos.app.goo.gl/aovGDLu9cgb1eM4j6



..edit looking into this it appears the Jet nearest the O3 injector pipe is leaking, the O rings are very old so I may replace them

No expert here, but it looks like the seal between the jet and the tub. Not sure what the fix is or if there is a patching method that works.

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: Beachcomber 300 series leak
« Reply #2 on: July 19, 2019, 08:17:18 am »
Hi all! I've noticed a leak around the O3 injector pipe in my beachcomber 321. It's a 2009. Does anybody have any ideas? It's wet above the pipe also so I assume this is coming from higher up and trickling down. It seems like a serious problem but any help would be greatly appreciated

Photo - https://photos.app.goo.gl/aovGDLu9cgb1eM4j6



..edit looking into this it appears the Jet nearest the O3 injector pipe is leaking, the O rings are very old so I may replace them

Cutting out all the foam, disassemble the jet, clean the mating surfaces and replace the o-ring.
Retired

Hot Tub Forum

Re: Beachcomber 300 series leak
« Reply #2 on: July 19, 2019, 08:17:18 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42