Author Topic: GFCI wont trip when test button is pushed (Read 3712 times)

JUST ME · « **on:** October 09, 2006, 11:02:00 pm »

Hi All,

I have a Caldera.

The 20A GFCI will not trip when I push the test button, do I call the electrician or dealer?

Thanks all

just me

Hot Tub Forum · « **on:** October 09, 2006, 11:02:00 pm »

In Canada eh · « **Reply #1 on:** October 09, 2006, 11:48:13 pm »

Just Me,

I would get ahold of your electrician could be wired incorrectly or a bad breaker

hottubdan · « **Reply #2 on:** October 10, 2006, 12:07:07 am »

Is it a new spa? Start with the dealer. If you got the breaker with the spa, it is actually part of the spa warranty. A feature of a Watkins product.

The dealer may want you to call electrician.

PotomacG · « **Reply #3 on:** October 10, 2006, 08:29:15 am »

Is this a new installation? � Has the breaker ever test tripped properly? �If so, I would assume a faulty breaker. �I would not use the tub if I were you, until the breaker is replaced. �This is a basic safety issue.

jfish63 · « **Reply #4 on:** October 10, 2006, 09:03:36 am »

Also I would suggest you check and ensure there is power coming to the breaker. They will not trip if there is no juice. I am not trying to be a prick and state the obvious but you would be suprised.

Hot Tub Forum · « **Reply #4 on:** October 10, 2006, 09:03:36 am »

Hot Tub Forum

News: