Author Topic: Water Care Question (Read 1978 times)

marks · « **on:** February 03, 2006, 12:24:39 pm »

I drained and refilled my tub about 3 weeks ago. The water is crystal clear. I just tested using a Taylor test kit and everything looks good but the PH is high, about 7.8 or 8.0. I verified it uses test strips. The TA looks good at about 100 and calcium hardness looks okay. The chlorine level also looks good, I still get a reading after adding 2 teaspoons last night after use.

I use N2 and Dichlor for water care.

The question is, should I mess with the PH and try to bring it down? I don't want to over manage the water.

Thanks,

Mark

Hot Tub Forum · « **on:** February 03, 2006, 12:24:39 pm »

Steve · « **Reply #1 on:** February 03, 2006, 12:38:15 pm »

I'd leave it for a couple of days Mark and then retest. It should come down naturally at this point.

Steve

marks · « **Reply #2 on:** February 03, 2006, 01:03:59 pm »

Steve,

Last Saturday the PH was good at about 7.4. It seems to have gone up.

Thanks,

Mark

Hot Tub Forum · « **Reply #2 on:** February 03, 2006, 01:03:59 pm »

Hot Tub Forum

News: