Author Topic: re-entering tub after stain & scale control (Read 4092 times)

Miss_Rosie · « **on:** January 28, 2006, 05:04:00 pm »

Can anyone tell me how long I need to wait before going into my hottub after dosing it with stain & scale control?

Hot Tub Forum · « **on:** January 28, 2006, 05:04:00 pm »

Brewman · « **Reply #1 on:** January 28, 2006, 05:22:19 pm »

Unless there are warnings to the contrary on the container, I'd put it in, run the pumps for 15 or 20 minutes to get it all nice and mixed in, and hop on in.

Miss_Rosie · « **Reply #2 on:** January 28, 2006, 05:59:14 pm »

Sorry, I guess I didn't explain it very well. The container says to run the jets continuously for 8 hours. It does not say anything about staying out of the tub for this time. However, it says when adding the chemical to wear gloves, don't let it come into contact with skin, etc. Just made me a little nervous so I wondered if I have to stay out for eight hours or if I can go back in tonight. It's such a nice night, I sure hate to stay out! Thanks!

Nitlion15 · « **Reply #3 on:** January 30, 2006, 09:11:47 am »

I have been in about 20 minutes after adding Stain & Scale. I never read the part about wearing gloves, I'll have to go back and look at the directions again.

Hot Tub Forum · « **Reply #3 on:** January 30, 2006, 09:11:47 am »

Hot Tub Forum

News: