What's the Best Hot Tub

Author Topic: Bro to Dichlor change  (Read 3816 times)

hamrhed

  • Full Member
  • ***
  • Posts: 112
  • "Hard Tellin" "Not Knowin"
Bro to Dichlor change
« on: December 05, 2005, 10:55:48 am »
Is it possible to change sanitizer from Bromine to Dichlor without changing the water?

If so should i wait for the residual level of Bro to drop off the scale or just start the change over?

Is the shock i use with the Bro, (SpaGuard -Spa Shock Potassium Peroxymonosulfate 31.0% Other 69%)compatible with Dichlor?

Just wanted to know. I won't be doing this until i use up what i have on hand.

Thanks,,, Chris

Hot Tub Forum

Bro to Dichlor change
« on: December 05, 2005, 10:55:48 am »

hymbaw

  • Full Member
  • ***
  • Posts: 612
Re: Bro to Dichlor change
« Reply #1 on: December 05, 2005, 11:13:54 am »
You'll have a difficult time switching without draining. It's possible but not worth the hassle.

MPS is a fine oxidizer for either.
People take different roads seeking fulfillment and happiness. Just because they're not on your road doesn't mean they've gotten lost.

Brewman

  • Ultimate Member
  • *****
  • Posts: 4092
  • Lead me not into temptation- I can find it myself!
Re: Bro to Dichlor change
« Reply #2 on: December 05, 2005, 11:33:01 am »
I've heard you need to change water to switch from bromine to chlorine.  
You can go from chlorine to bromine without a water change.
Brewman

Dr. Spa™ Ret.

  • Ultimate Member
  • *****
  • Posts: 3377
  • Retired (mostly) from the industry after 33 years
Re: Bro to Dichlor change
« Reply #3 on: December 05, 2005, 11:44:40 am »
The shock you have is fine for chlorine.

Realistically, a bromine sanitized spa can not be switched over to chlorine, if there's still bromine in the water. All the chlorine added to the water is going to convert bromide ions into hypobromous acid. As long as there's 15 ppm or more of bromide ions in the water, all the chlorine added is going towards converting bromide ions into hypobromous acid, none of it will provide a chlorine residual. The spa will continue to be bromine sanitized until the bromide level gets below 15 ppm. There is no test kit for measuring just bromide ions in the water and therefore no way to know when the bromide level is below 15 ppm. It could take a week. It could take 2 months.
If you can't sell it on eBay, it may not even qualify as landfill.

Retired (mostly) from the industry after 33 years...but still putzing around with a consumer information website, and trying to sell obsolete owners manuals

hamrhed

  • Full Member
  • ***
  • Posts: 112
  • "Hard Tellin" "Not Knowin"
Re: Bro to Dichlor change
« Reply #4 on: December 05, 2005, 12:44:32 pm »
Thanks for the Info

I'll just wait for the first water change to make a switch...

Ya learn somthin new every day...

Have a good one  :)

st18901

  • Full Member
  • ***
  • Posts: 215
  • '86 Sovereign!
Re: Bro to Dichlor change
« Reply #5 on: December 05, 2005, 12:53:57 pm »
Out of curiousity, why do you want to switch?

hamrhed

  • Full Member
  • ***
  • Posts: 112
  • "Hard Tellin" "Not Knowin"
Re: Bro to Dichlor change
« Reply #6 on: December 05, 2005, 01:03:05 pm »

Good question...

I don't know...  seem like i get a little itchy skin about half hour after a soak... not too bad at all.. just thought i would try the dichlor next time...

Still in the trial stage.. I guess

Spatech_tuo

  • Mentor Level Member
  • ******
  • Posts: 6340
Re: Bro to Dichlor change
« Reply #7 on: December 05, 2005, 01:30:40 pm »
Quote
Good question...

I don't know...  seem like i get a little itchy skin about half hour after a soak... not too bad at all.. just thought i would try the dichlor next time...

Still in the trial stage.. I guess


I think you'll like the switch, most do.
220, 221, whatever it takes!

hamrhed

  • Full Member
  • ***
  • Posts: 112
  • "Hard Tellin" "Not Knowin"
Re: Bro to Dichlor change
« Reply #8 on: December 05, 2005, 03:28:25 pm »
Thanks Spatech,

So you think its a good call?

It seems like most people here use Dichlor...

st18901

  • Full Member
  • ***
  • Posts: 215
  • '86 Sovereign!
Re: Bro to Dichlor change
« Reply #9 on: December 05, 2005, 03:54:18 pm »
I use Bromine and MPS for shock.
So far, I love it. I used chlorine in my last hot tub. I personally prefer bromine... I think.

Brewman

  • Ultimate Member
  • *****
  • Posts: 4092
  • Lead me not into temptation- I can find it myself!
Re: Bro to Dichlor change
« Reply #10 on: December 05, 2005, 04:07:08 pm »
I went from Baqua to Bromine.  So far I'm okay with Bromine, but wouldn't have a problem switching to dichlor if I needed to.  

Brewman

Spatech_tuo

  • Mentor Level Member
  • ******
  • Posts: 6340
Re: Bro to Dichlor change
« Reply #11 on: December 05, 2005, 04:33:59 pm »
Quote
I use Bromine and MPS for shock.
So far, I love it. I used chlorine in my last hot tub. I personally prefer bromine... I think.


That's the kind of response I like. I don't care for Bromine at all but by trying both you can at least compare. In my travels, I've found that most people who've tried both prefer the dichlor but I certainly have met a few who are the opposite and if after comparing they prefer Bromine then that's great.
220, 221, whatever it takes!

hamrhed

  • Full Member
  • ***
  • Posts: 112
  • "Hard Tellin" "Not Knowin"
Re: Bro to Dichlor change
« Reply #12 on: December 05, 2005, 05:28:20 pm »
seems to be an even split,,,,  personal pref...

ill give it a shot next h2o change (spring) and see if i like it better, same or not at all...

thanks for the input fellas...

I'll be in tonight....  Spatopia you call it...  oh ya

Hot Tub Forum

Re: Bro to Dichlor change
« Reply #12 on: December 05, 2005, 05:28:20 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42