new hot springs sovereign leak question

[hotubinn]

It's pretty darn close to the jet. (1/4 inch maybe)
Here's a repost of the pic. I'm pointing at the crack -




The proximity to the jet is the reason that I think the only thing that can work, in lieu of replacement, is epoxy.

I would use an inside coupler and be done with it!

[st18901]

the crack is to close to the jet body - about 1/4 inch - not enough to attach anything.
I have epoxied the entire thing, so once I get the pump rebuilt (hopefully tomorrow or day after the parts will arrive), I'll test it. If it leaks, I'm replacing all of it.