What's the Best Hot Tub

Author Topic: LS2 code, pump will not turn off  (Read 3170 times)

Hubjeep

  • Junior Member
  • *
  • Posts: 53
  • I love YaBB 1G - SP1!
LS2 code, pump will not turn off
« on: September 16, 2005, 01:45:08 pm »
Hello,
I used the Vita Spa Elan a couple days ago, it worked fine until I went to turn off the Jets.  The tub has two motors, each with a high and low speed.  

Both pumps will run fine on high, but pump 2 will not run on low, when I try to turn it on I hear it try to start for a couple seconds, then nothing, after a second try it displays “LS2” (Pump 2 low speed inoperative) and runs the motor on high (so I have it unplugged for now).    >:(

Any ideas?  Is there a way to test the motor, or a repair manual available for the tub?

Thanks,
John

Hot Tub Forum

LS2 code, pump will not turn off
« on: September 16, 2005, 01:45:08 pm »

hottub.pool_boy

  • Full Member
  • ***
  • Posts: 663
  • New England's oldest HotSpring Dealer- 1983
Re: LS2 code, pump will not turn off
« Reply #1 on: September 16, 2005, 09:40:46 pm »
Bad start capacitor or start switch, maybe burnt wire.
  All would be in motor. start capacitor can hold/ store an electrical charge-BE CAREFUL.
OEM HotSpring Stuff & SpaGuard Chemicals Online

Hot Tub Forum

Re: LS2 code, pump will not turn off
« Reply #1 on: September 16, 2005, 09:40:46 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42