What's the Best Hot Tub

Author Topic: MPS foam  (Read 8404 times)

steve771

  • Full Member
  • ***
  • Posts: 129
MPS foam
« on: December 04, 2004, 12:58:37 pm »
I started doing an alternate shocking procedure, where every other week I use MPS instead of Dichlor as a shock.  I still sanitize after every use with Dichlor (pretty much daily).  I've noticed that there is some foaming when using MPS, but not when using Dichlor.  It isn't a lot, but definitely noticible.  Is this normal?   ???

Hot Tub Forum

MPS foam
« on: December 04, 2004, 12:58:37 pm »

Brewman

  • Ultimate Member
  • *****
  • Posts: 4092
  • Lead me not into temptation- I can find it myself!
Re: MPS foam
« Reply #1 on: December 04, 2004, 03:25:14 pm »
I use only MPS shock, with bromine, and no foaming problems.
Brewman
Brewman

bulmer4nc

  • Full Member
  • ***
  • Posts: 478
  • Now a Canes Fan.
Re: MPS foam
« Reply #2 on: December 04, 2004, 03:54:26 pm »
Quote
I use only MPS shock, with bromine, and no foaming problems.
Brewman


Ditto.
Home of the Stanley Cup Champions!!!

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Re: MPS foam
« Reply #3 on: December 05, 2004, 09:49:30 am »
I do pretty much the same as you with no foaming problems. Are you also cleaning the filter at the same time? Some filter cleaners cause foamin if you don't , as I like to say, "rinse the beegeebers" out of them.
« Last Edit: December 06, 2004, 08:17:56 am by wmccall »
Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

steve771

  • Full Member
  • ***
  • Posts: 129
Re: MPS foam
« Reply #4 on: December 05, 2004, 12:47:20 pm »
Yep, I clean the filters regularly, but my filters are a little different in that they go in the wash with a very slight amount of detergent and some bleach (cloth style that fit over a plastic "basket").  Always do an extra rinse.  Maybe I'll give it a shot w/o the detergent at all, but that is what the manufacturer recommends.

I just wondered if, all other things being equal, MPS could cause foaming where dichlor doesn't.  Chlorine really doesn't bother me at all, but my wife is a bit sensitive, so that's why I was trying the alternative method.

steve771

  • Full Member
  • ***
  • Posts: 129
Re: MPS foam
« Reply #5 on: December 05, 2004, 08:24:02 pm »
And along the same lines... when using MPS, does it tend to leave the water a little cloudy compared to dichlor?

Brewman

  • Ultimate Member
  • *****
  • Posts: 4092
  • Lead me not into temptation- I can find it myself!
Re: MPS foam
« Reply #6 on: December 05, 2004, 09:20:51 pm »
Our water is clear, but I've never used dichlor so I can't compare the two.
Brewman
Brewman

steve771

  • Full Member
  • ***
  • Posts: 129
Re: MPS foam
« Reply #7 on: December 06, 2004, 01:24:08 am »
Thanks Brewman.  I really think all the problems I'm experiencing now relate back to when I tried that "velvet touch" crap from leisuretime.  It caused foaming then, and I wonder if there is some sort of reaction to that.  I'll probably do a drain and fill, but I would like to get another month out of this water.

Brewman

  • Ultimate Member
  • *****
  • Posts: 4092
  • Lead me not into temptation- I can find it myself!
Re: MPS foam
« Reply #8 on: December 06, 2004, 08:50:09 am »
If you need to stretch it out another few weeks, why not try one of the foam dispersing products?
The one I use works fine, for the few times I've ever had foaming issues.  
Brewman
Brewman

steve771

  • Full Member
  • ***
  • Posts: 129
Re: MPS foam
« Reply #9 on: December 06, 2004, 01:12:59 pm »
I have used the foam dispersing stuff.  It worked well, but I don't like adding more to the mix than I have to.  I'm starting to feel like a chemist making some evil brew!  ;)

The foam only occurs now with an MPS shock, and then only a little that I can manually skim off, so it's no big deal.  I think I can just live with it until the water change.  Thanks!


tony

  • Ultimate Member
  • *****
  • Posts: 2331
  • 2002 Optima
Re: MPS foam
« Reply #10 on: December 06, 2004, 01:22:42 pm »
MPS should actually help get rid of foam being an oxidizer that eliminates organics.

steve771

  • Full Member
  • ***
  • Posts: 129
Re: MPS foam
« Reply #11 on: December 06, 2004, 02:05:06 pm »
Quote
MPS should actually help get rid of foam being an oxidizer that eliminates organics.


Well, that statement only makes me think it is more than likely that 'velvet touch' crap!  :P  Although maybe the foam coming up is what it is trying to get rid of (if that makes sense)?  ???

Chas

  • Mentor Level Member
  • ******
  • Posts: 6481
  • Hot water is Cool.
    • Spas etc.
Re: MPS foam
« Reply #12 on: December 06, 2004, 02:15:45 pm »
Quote
MPS should actually help get rid of foam being an oxidizer that eliminates organics.

Some versions of MPS shock - "Freshwater" by HotSpring for example - contain a clarifier. I have found that over doing it with this particular product can increase the likelyhood of foam. It also tends to raise the TDS if overdone.
Former HotSpring Dealer - Southern Cal.

tony

  • Ultimate Member
  • *****
  • Posts: 2331
  • 2002 Optima
Re: MPS foam
« Reply #13 on: December 07, 2004, 02:47:36 pm »
That is why I now use just a straight MPS product...no buffers, no clarifiers.  It is also less expensive and you use less.

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Re: MPS foam
« Reply #14 on: December 07, 2004, 02:59:27 pm »
Quote
That is why I now use just a straight MPS product...no buffers, no clarifiers.  It is also less expensive and you use less.


Can you give a brand example?


Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

Hot Tub Forum

Re: MPS foam
« Reply #14 on: December 07, 2004, 02:59:27 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42