Author Topic: Slugging? (Read 2184 times)

steve771 · « **on:** November 23, 2004, 03:05:48 pm »

I thought someone here had referenced that as a way to raise TA w/o affecting pH so much, but darned if I can find it.

I think it had to do with adding the pH up/down in a non-running spa for a bit, but I can't remember. Help!

Hot Tub Forum · « **on:** November 23, 2004, 03:05:48 pm »

poolboy34 · « **Reply #1 on:** November 23, 2004, 03:14:47 pm »

Slugging:

Step one, make sure your jets have been off for 10 mins
Note: some spas have a stand-by mode that shuts off the circ pump as well.

Step Two: Add x amount of Alkalinity Increaser/pH decreaser in the one spot in the deepest sart of the spa, to raise/lower the alk.

Step Three: wait ten minutes

Step Four: Turn the jets on high for 30 mins.

Repeat if necessary

Jason,
Store Manager for a D-1 & Cladera Dealer

steve771 · « **Reply #2 on:** November 23, 2004, 03:50:46 pm »

Thanks Jason, I've filed it away for next time as well!

poolboy34 · « **Reply #3 on:** November 23, 2004, 07:31:12 pm »

anytime

Hot Tub Forum · « **Reply #3 on:** November 23, 2004, 07:31:12 pm »

Hot Tub Forum

News: