Only a few weeks into being a hot tub owner and struggling hard with water chemistry issues! Using a frogease bromine/mineral inline system and i'm definitely doing something wrong. History: Filled, ahhh-somed, emptied (including wet vaccing jets), wiped down with white vinegar solution, refilled and used the frog shock starter. Out of the tap, TA, PH and hardness all appear low. I get the TA and PH balanced. After a week or so, I brought the hardness up. Shortly after that water gets cloudy. I shock with MPS. Still cloudy. Shock with dichlor. Still cloudy. Thoughout, foaminess is a recurring issue, that I've battled with occasional anti-foam (this is a beach house, so even if you keep detergented bathing suits out, you're not keeping sun screen out without becoming the worlds biggest nag).
After use by guests with 3 tweens felt like a good time to drain and start over. I drain (no vacuum this time), wipe down with white vinegar solution, refill, and shock with dichlor. The next day I bring up TA, then PH, then hardness. It gets only minimual use during the next few days, but day 4 its gone cloudy. By day 6 its turned quite green.
No idea whats going on, but getting frustrated and not helping the worlds water shortage! I've now added Natural Chemistry Spa Metal Free, and no idea how long thats supposed to take, but nothing has changed at this point (its only been a couple of hours, but i'm driving myself crazy here). Any ideas whats going on and how it can get addressed?