Welcome to our forum.
Hi all, I have a Nordic Crown 2 coming next month, which I plan to put on a freestanding low ground-level deck (I have neighbors within 20ft and only a 6 foot fence). I had been planning on having my contractor/electrician bring the conduit to the place indicated on the owner's manual diagram, but the dealer now says it is impossible for them to place the tub accurately on the stub of the conduit, and that though he highly recommends that it be located on the outside of the unit, if I want to have it come through the bottom I'll have to have the electrical done after they've brought the tub in.Is this normal? I really want a clean design (it's a pretty Ipe deck) and don't want any wiring visible. It makes me nervous that they won't be able to deliver it and get it up and running and talk with me about chemicals, etc. I was hoping to fill it with them present.Also, should I be asking my deck contractor to put the conduit in, or the electrician?What do you all recommend?
Just spoke with the manager. They refuse to do it but said I can do it myself if I want to. So frustrating.
@HotTubGuy, they told me they have run into lots of problems and don't like to do it. That said, I ended up talking with their main service guy yesterday and I think he will come out and do it. They also told me it's really rare to trench the conduit. I'm completely confused. From online forums and people I know, no one has conduit just running across their lawn or even at the bottom of their hot tub.And this is the biggest dealer (I think) in Colorado!