Author Topic: Flo code (Read 2266 times)

chrisonowasco · « **on:** July 13, 2020, 04:03:53 pm »

I have an older what i believe is a Reflections?Vita hot tub. I keep getting a FLO error code. I made sure there was no air in the lines, I then looked for a pressure switch, apparently there isnt one on this type of spa. Any ideas or advice?

Hot Tub Forum · « **on:** July 13, 2020, 04:03:53 pm »

CanadianSpaTech · « **Reply #1 on:** July 13, 2020, 06:11:32 pm »

Dirty Filters? Remove filters until issue is fixed

chrisonowasco · « **Reply #2 on:** July 13, 2020, 06:14:01 pm »

Thank you for the reply. I tired that already. There�s no pressure switch on the heater. Not sure if I should just replace that next? Any help is appreciated.

CanadianSpaTech · « **Reply #3 on:** July 14, 2020, 04:31:43 pm »

Well it's a flow issue so it shouldn't be the heater

chrisonowasco · « **Reply #4 on:** July 14, 2020, 04:40:05 pm »

Possible air lock? Maybe I should drain the tub and refill it?

JayTee · « **Reply #5 on:** July 16, 2020, 04:59:44 pm »

I had a very persistent air lock until I drained, then filled my tub Via the inlet for the heater circulation pump. That being said i purchased the wrong pump and its about %50 the strength thats meant to be in there, but after filling from the inlet she started working just fine.

https://www.youtube.com/watch?v=cQeVKaTnwOw&t=79s

skip to 1:40

Hot Tub Forum · « **Reply #5 on:** July 16, 2020, 04:59:44 pm »

Hot Tub Forum

News: