Yikes, everyone. I winterized my tub (2013 Sundance Cameo 880) before the great cold (got down to -5 one night) of 2017-18 came and vacuumed out all the water I could with my wet vac. I also poured 2.5 gallons of RV antifreeze into it afterwards. But I forgot to drain the pump impeller housing by removing the drain plugs and sucking up the water that comes out. It warmed up the past few days and I remembered my oversight this evening. I went out and found the ~2" return and supply pipes very cold and sweaty as well as the impeller housing on the side of the 2 pumps. It had warmed up enough for me to completely drain the two big pumps of their water. The circ pump was dry.
I turned on the tub and ran both pumps and heard the impellers blowing air so mechanically it seems okay. But do you think I could be in for trouble with leaks when I fill it again? If so, what's the cure? New impeller housing that bolts onto the pump? Can I do this work myself (I do my own car repairs and maintenance so pretty adept in the area of wrenching, hoses, etc.)?
If anyone has a cure for stupidity, I'd also appreciate your suggestions and advice
