What's the Best Hot Tub

Author Topic: Pump one concern  (Read 1878 times)

SnowHot

  • Junior Member
  • *
  • Posts: 38
Pump one concern
« on: July 02, 2017, 07:26:42 pm »
Its been a while since I've posted here, and we still love our Jacuzzi.

As part of my regular maintenance, I cleaned the filters today and put them back in.
I did all the usual stuff.  - shut off the power source when I pulled the filters, kept any possible debris away from filter area, and rinsed filters thoroughly after using cartridge clean solution.
 
Pump one and two both worked when I turned it back on, but after one cycle, pump one stopped working entirely, as if it were shut off.
I could hear a click when I tried to turn it on but it wouldn't engage.

Thoughts I'm having about the situation:
  • Conditions here are hot - Think high desert. Could the pump be over heated?
    It could be possible that a tiny piece of debris got into the filter area, which I didn't notice?
     

Model: Jacuzzi J-335 (2008 or 2009?)

I would happily contact my dealer about this but he's closed until the 5th.
Any trouble shooting would be great.  Thanks.

Hot Tub Forum

Pump one concern
« on: July 02, 2017, 07:26:42 pm »

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Pump one concern
« Reply #1 on: July 02, 2017, 09:50:51 pm »
 My guess is heat, kill the power for a couple of hours then try it. 

SnowHot

  • Junior Member
  • *
  • Posts: 38
Re: Pump one concern
« Reply #2 on: July 05, 2017, 07:56:57 pm »
Thanks Jacuzzi Jim.
It seems that it was a heat issue.  Once the temps cooled down and the pump sat idle, all was well.

I'm thinking this is something to keep an eye on going forward.

Hot Tub Forum

Re: Pump one concern
« Reply #2 on: July 05, 2017, 07:56:57 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42