What's the Best Hot Tub

Author Topic: any ideas on sealing off inspa speakers? artesian  (Read 5831 times)

MikeK157

  • Junior Member
  • *
  • Posts: 70
any ideas on sealing off inspa speakers? artesian
« on: April 12, 2017, 02:04:12 pm »
My hot tub has 4 inspa speakers i have no plans of using. I am buying 4 new covers and planning on removing all 4 speakers. They are all broken due to water getting into them so i dont see a point in getting new ones every year.

Would something like this be a good idea to seal it off from the back side of the speaker so no water gets into my spa cavity?http://www.hottubessentials.ca/fix-a-leak.html

Hot Tub Forum

any ideas on sealing off inspa speakers? artesian
« on: April 12, 2017, 02:04:12 pm »

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: any ideas on sealing off inspa speakers? artesian
« Reply #1 on: April 12, 2017, 06:36:00 pm »
I guess I am not following you? The speaker covers will allow water through. This is different. You will have to get some plastic under the speaker cover. Then use silicon for the screws.

Or am I not following?
Retired

JacuzziJack

  • Full Member
  • ***
  • Posts: 106
Re: any ideas on sealing off inspa speakers? artesian
« Reply #2 on: April 13, 2017, 07:34:41 pm »
You could just replace the speakers with some new waterproof speakers too:
http://www.parts-express.com/pyle-plmr51b-525-waterproof-marine-speaker-pair-black--267-7026

JacuzziJack

  • Full Member
  • ***
  • Posts: 106
Re: any ideas on sealing off inspa speakers? artesian
« Reply #3 on: April 13, 2017, 07:35:38 pm »
I would think Parts-Express or some ebay seller would have blank-off covers too

MikeK157

  • Junior Member
  • *
  • Posts: 70
Re: any ideas on sealing off inspa speakers? artesian
« Reply #4 on: April 13, 2017, 07:54:51 pm »
I guess I am not following you? The speaker covers will allow water through. This is different. You will have to get some plastic under the speaker cover. Then use silicon for the screws.

Or am I not following?

The speaker cover will allow water in so my goal is to seal it off from the back so it is waterproof

MikeK157

  • Junior Member
  • *
  • Posts: 70
Re: any ideas on sealing off inspa speakers? artesian
« Reply #5 on: April 14, 2017, 04:43:02 pm »
I guess I am not following you? The speaker covers will allow water through. This is different. You will have to get some plastic under the speaker cover. Then use silicon for the screws.

Or am I not following?

Silicon is a good idea. What type of plastic do you recommend? I thought some sealant spray might work behind the cover

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: any ideas on sealing off inspa speakers? artesian
« Reply #6 on: April 14, 2017, 05:47:51 pm »
I'd get a little piece of plastic like this https://www.interstateplastics.com/Acrylic-Clear-Film-Masked-Sheet-ACRCLEFSH.php and silicon it down over the hole under the speaker cover.
Retired

Hot Tub Forum

Re: any ideas on sealing off inspa speakers? artesian
« Reply #6 on: April 14, 2017, 05:47:51 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42